RMA 370
English
22
Clean the unit thoroughly after each use.
Careful maintenance protects the unit
from damage and extends its useful life.
Cleaning Position
WARNING
Place your mower on a firm level surface
before standing it on end. The mower
can topple over when it is in the cleaning
position. Always to one side of the
mower. To reduce the risk of injury,
never work in front of or behind the
mower.
N Remove the battery and fuse key.
N Fold the handlebar.
N Stand the mower on end so that it is
supported by the ends of the lower
handlebar (1).
Cleaning the Mower
N Put the mower in the cleaning
position.
N Clean the cutting blade.
N Use a brush and water to clean the
underside of the mower after
loosening stubborn grass residue
from the housing and ejection chute
with a stick.
N Clean dirt from cooling air duct
between motor hood and housing
base.
If dirt cannot be removed with water,
brush or cloth, STIHL recommends you
use a special cleaner (e.g. STIHL
special cleaner).
The type of blade initially supplied with
the mower depends on the market.
1 Mowing blade
2 Mulching blade
Checking the Blade
N Put the mower in the cleaning
position.
N Clean the cutting blade and inspect
it for wear and/or damage (nicks or
cracks), replace if necessary.
Inspection and Maintenance
by User
To Next Page
Loading...
