► On the other side, push screw (6) through
bores (11) in upper handlebar (5) and lower
handlebar (1) from the outside inwards.
► Fit rotary handles (9) onto screws (6) on both
sides and screw in.
Upper handlebar (5) is firmly attached to lower
handlebars (1).
► Place cable (10) into cable clip (7).
► Press cable clip (7) onto upper handlebar (5)
and allow to engage.
► Place cable (10) into cable clip (12).
► Press cable clip (12) onto lower handlebar (1)
and allow to engage.
The handlebar must not be dismantled again.
6.2 Folding Up and Folding the
Handlebar
6.2.1 Folding Up the Handlebar
► Switch the lawn mower off.
► Detach the extension cable connector from the
mains plug of the lawn mower.
► Place the lawn mower on a level surface.
► Fold up upper handlebar (1) and hold with one
hand. Make sure that cable (2) is not dam‐
aged.
► Tighten rotary handles (3).
Upper handlebar (1) is firmly attached to lower
handlebar (4).
6.2.2 Folding the Handlebar
The handlebar can be folded for space-saving
transport or storage.
► Switch the lawn mower off.
► Detach the extension cable connector from the
mains plug of the lawn mower.
► Place the lawn mower on a level surface.
► Unscrew rotary handles (3) until they turn
freely.
► Fold down upper handlebar (1) forwards,
ensuring that cable (2) is not damaged.
6.3 Assembling, Attaching and
Detaching the Grass Catcher
Box
6.3.1 Assembling the Grass Catcher Box
► Fit upper part of grass catcher box (1) onto
lower part of grass catcher box (2).
► Press pins (3) through openings (4) from the
inside.
► Press upper part of grass catcher box (1)
downwards.
The upper part of the grass catcher box
engages with a click.
6.3.2 Attaching the Grass Catcher Box
► Switch the lawn mower off.
► Detach the extension cable connector from the
mains plug of the lawn mower.
► Place the lawn mower on a level surface.
English 6 Assembling the Lawn Mower
30 0478-121-9905-A
To Next Page
Loading...
