EasyManuals Logo

Stihl RME 443 User Manual

Stihl RME 443
Go to English
262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
0478 121 9921 A - EN
48
18.1 REACH
REACH is an EC Directive for the
registration, evaluation, authorisation and
restriction of chemicals.
Information on compliance with the
REACH Directive (EC) No. 1907/2006 is
available from www.stihl.com/reach.
Fault:
Motor does not start
Possible cause:
No mains voltage
Connection cable, plug, plug connector
or switch defective
Start button not pressed
Motor is overloaded because the grass
is too tall or too wet
Motor overload protection activated
Mower housing is blocked
Fuse in plug faulty (GB version)
Remedy:
Check fuse (Ö 11.1)
Check cable/plug/switch and replace if
necessary (Ö 11.1)
Press start button (Ö 11.3)
Do not switch on motor in high grass,
adapt cutting height (Ö 8.4)
Allow machine to cool down (Ö 9.4)
Clean mower housing (Ö 12.2)
Replace fuse in plug (#)
Fault:
Frequently tripped mains fuse
Possible cause:
Unsuitable electric cable
Power overload
Machine is overloaded due to mowing
grass which is too long or too wet
Remedy:
Use suitable electric cable (Ö 11.1)
Connect machine to another circuit
Adapt cutting height and mowing speed
to mowing conditions (Ö 8.4)
Fault:
Excessive vibration during operation
Possible cause:
Blade fastening screw is loose
Blade is not balanced
Remedy:
Tighten blade fastening screw (Ö 12.6)
Re-sharpen (balance) or replace blade
(Ö 12.7)
Fault:
Poor cut, lawn turning yellow
Possible cause:
Mowing blade is blunt or worn,
Rate of feed is too high in relation to the
cutting height
Remedy:
Re-sharpen or replace mowing blade
(Ö 12.7)
Reduce rate of feed and/or select
correct cutting height (Ö 8.4)
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L
pA
82 dB(A)
Uncertainty K
pA
2 dB(A)
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
1.40 m/sec²
Uncertainty K
hw
0.70 m/sec²
Measurement in accordance with
EN 20643
L/W/H: 138/49/107 cm
Weight: 20 kg
Weight (Great Brit-
ain only): 21 kg
RME 443.0 C:
In accordance with Directive 2000/14/EC:
Guaranteed sound
power level L
WAd
: 96 dB(A)
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L
pA
82 dB(A)
Uncertainty K
pA
2 dB(A)
Specified vibration characteristic in
accordance with EN 12096:
Measured value a
hw
1.30 m/sec²
Uncertainty K
hw
0.65 m/sec²
Measurement in accordance with
EN 20643
L/W/H: 138/49/108 cm
Weight: 22 kg
RME 443.0:
19. Troubleshooting
# If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl RME 443 and is the answer not in the manual?

Stihl RME 443 Specifications

General IconGeneral
BrandStihl
ModelRME 443
CategoryLawn Mower
LanguageEnglish

Related product manuals