SE 61
English
9
N Slide the extension tube holder (3)
along the extension tube (distance
A approx. 5 inches (13 cm)) and
clamp it down with the screw (4)
N Fit second extension tube to the
other end
N Depending on the intended use of
vacuum cleaner – select the
appropriate accessory and fit to
lower end of extension tube
Mounting the holder for accessories
N Press the tab of the accessory
holder (10) over the recess on the
left side of the upper part of the
vacuum cleaner – press down on
the accessory holder until it
engages
Mounting the holder for the suction
hose
N Fit the holder (11) for the suction
hose onto the tab of the upper part
of the vacuum cleaner until it
engages
Fastening accessories
Fasten accessories on the holders
provided – as shown in picture.
646BA021 KN
10
646BA022 KN
11
To Next Page
Loading...
