Stihl SE 133 ME - User Manual

Questions and Answers

T
tarcherAug 15, 2025
What to do if the air flow rate is low on my Stihl SE 133 ME?
- A
  April RussellAug 16, 2025
  If the air flow rate is less than 20 m/s, the air velocity monitoring LED in the suction hose lights up and a succession of short beeps is heard on your Stihl Vacuum Cleaner, first, ensure that the diameter of the suction hose is correctly set. Then, check if the filter bag or the container is full and replace the filter bag or empty the container. Also, a dirty filter may cause this problem, so clean or replace the filter. Furthermore, inspect the suction hose, the hand tube, or the accessory for any blockages and clean them if necessary. Finally, verify the seal between the top part and the container is clean and undamaged; clean the seal or ask a STIHL authorized dealer to replace it if needed.
M
Makayla PhillipsAug 18, 2025
Why is dust coming out of my Stihl Vacuum Cleaner?
- B
  Barbara KennedyAug 18, 2025
  If dust is escaping from your Stihl Vacuum Cleaner, the filter may be damaged. Replace the filter to resolve this issue.
M
Mary MayAug 21, 2025
How to fix a Stihl SE 133 ME that does not start?
- B
  Bruce SmithAug 22, 2025
  If your Stihl Vacuum Cleaner is not starting when switched on, make sure the connecting cord is plugged in. Check and replace the fuse of the building service connection or the earth-leakage circuit breaker if it has tripped. Also, empty the container if it is full, as the float switch may have activated. Finally, inspect the float switch itself to ensure it is working correctly.
K
Kathryn WoodsAug 25, 2025
Why is the airflow low on my Stihl SE 133 ME and beeping?
- A
  Anthony HartAug 25, 2025
  If you notice the air flow rate is less than 20 m/s, the air velocity monitoring LED is lighting up, and you hear short beeps from your Stihl Vacuum Cleaner, it could be due to several reasons. Check if the diameter of the suction hose is set correctly. Also, make sure to replace the filter bag or empty the container if it's full. A dirty filter can also cause this issue, so clean or replace it. Finally, inspect the suction hose, hand tube, or accessory for any blockages, and clean them if necessary. If the seal between the top part and the container is dirty or damaged, clean it or consult a STIHL authorized dealer for a replacement.
D
Daniel MirandaAug 27, 2025
How to increase suction power on a Stihl SE 133 ME?
- L
  Leonard RobertsAug 27, 2025
  If the suction power of your Stihl Vacuum Cleaner is too low, first set the suction power appropriately. If that doesn't help, replace the filter bag or empty the container if it's full. Clean or replace the filter if it's dirty, potentially using the automatic filter cleaning function. Clear any blockages in the suction hose, hand tube, or accessory. Lastly, ensure the seal between the top part and the container is clean; if it's damaged, contact a STIHL authorized dealer for replacement.
L
lhendersonAug 30, 2025
Why does my Stihl SE 133 ME turn off while running?
- N
  Nathan HoffmanAug 31, 2025
  If your Stihl Vacuum Cleaner switches off during operation, it could be due to several reasons. First, ensure the connecting cord is properly plugged into the socket. Check the fuse of the building service connection or the earth-leakage circuit breaker and replace it if tripped. It's also possible that the fuse rating of the socket is too low, so try plugging the cord into a socket with the correct fuse rating. The container might be full, causing the float switch to operate; empty the container in this case. Lastly, a dirty cooling air filter can cause overheating; clean or replace the filter and allow the vacuum cleaner to cool for 5 minutes.
J
James SimonSep 2, 2025
Why is the suction power too low on my Stihl SE 133 ME Vacuum Cleaner?
- C
  colin51Sep 2, 2025
  If your Stihl Vacuum Cleaner has low suction power, start by adjusting the suction power setting. If that doesn't help, the filter bag or container might be full; replace the filter bag or empty the container. A dirty filter can also cause this issue; try switching on the automatic filter cleaning, or clean or replace the filter. Check for blockages in the suction hose, hand tube, or accessory and clean them if necessary. Finally, inspect the seal between the top part and the container for dirt or damage; clean the seal or have it replaced by a STIHL authorized dealer.
M
michael39Sep 5, 2025
How to fix a Stihl SE 133 ME Vacuum Cleaner that won't start?
- B
  Brian OsbornSep 6, 2025
  If your Stihl Vacuum Cleaner isn't starting, there are a few things to check. Make sure the plug on the connecting cord is properly plugged in. Inspect the fuse of the building service connection or the earth-leakage circuit breaker and replace it if necessary. The container might be full, causing the float switch to operate; empty the container. Also, check the float switch itself to ensure it is functioning correctly.
P
perezjeffreySep 8, 2025
What to do if my Stihl SE 133 ME switches off while in operation?
- M
  Monica McgeeSep 8, 2025
  If your Stihl Vacuum Cleaner switches off during operation, there are several potential causes. First, ensure that the connecting cord is properly plugged into the socket. Check the fuse of the building service connection or the earth-leakage circuit breaker and replace it if tripped. The socket's fuse rating might be too low, so try a socket with the correct rating. Also, empty the container if it's full, as the float switch may have operated. Finally, a dirty cooling air filter can cause overheating; clean or replace it and allow the vacuum cleaner to cool for 5 minutes.
K
Kelly WalkerSep 12, 2025
What to do if dust is escaping from my Stihl Vacuum Cleaner?
- J
  josephruizSep 12, 2025
  If dust is escaping from your Stihl Vacuum Cleaner, the filter is likely damaged and needs to be replaced.