Stihl SE 133 ME - Fitting and Removing Suction Hose; Fitting and Removing Hand Tube and Adapter

0458-660-0121-A
14
English 6 Assembling the wet/dry vacuum cleaner
► Lift off the top part.
► Pull the sleeve (1) off the suction connector (2).
► Close the sleeve (1) with the slide (5).
► Tie up disposal bag (3) with the tape (4).
► Remove disposal bag (3) from the container.
► Dispose of the disposal bag (3) in accordance with the
applicable regulations and in an environmentally
responsible manner.
6.4 Fitting and removing suction hose
6.4.1 Attaching the suction hose
► Pull off the container cap (1).
► Push sleeve (2) into the suction connector (3) and turn
until it is firmly seated.
6.4.2 Removing the suction hose
► Pull the sleeve (1) out of the suction connector (2).
► Push container cap (3) into suction connector (2).
6.5 Fitting and removing hand tube and adapter
6.5.1 Fitting the hand tube or adapter
► Push hand tube (1) or adapter (3) into the sleeve (2).
The hand tube (1) or adapter (3) engages audibly.
0000-GXX-4048-A0
1
3
2
25
4
0000-GXX-3970-A0
1
3
2
0000-GXX-4070-A0
3
2
1
2
1
0000-GXX-3971-A0
3