SE 62, SE 62 E
English
31
N Switch off the vacuum cleaner
N Unplug the power plug from the
socket
N Open the container – see
“Assembling the machine”
When dry-vacuuming without filter bag
and when wet-vacuuming
N Remove suction hose from intake
port
N Empty the container and dispose of
its contents in accordance with the
applicable regulations
When dry-vacuuming with filter bag
N Pull filter bag sleeve off intake port
and seal filter bag sleeve with slide
N Carefully remove filter bag from
container and dispose of in
accordance with statutory
regulations
N Insert new filter bag (instructions on
filter bag)
N Push filter bag sleeve onto intake
port as far as possible
Close the container
N Clean the edge of the container
N Fit the upper part of the vacuum
cleaner – see “Assembling the
machine”
N before fitting the suction hose:
Clean the sleeve of the suction hose
and intake port
N Close slide on hand tube
N Switch on machine
N Press opening of hand tube firmly
against the level surface or close by
hand
N Press the button (1) to clean filter 3x
Dust deposits are removed from the filter
element.
Emptying the container
Cleaning the filter element
To Next Page
Loading...
