Stihl SR 430 - Page 3

Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2014 0458-454-8621-F. VA0.J14. 0000006507_003_GB
SR 430, SR 450
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
this manual to operate your mistblower.
To receive maximum performance and
satisfaction from your STIHL
mistblower, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your
mistblower. For further information you
can go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
WARNING
Because a mistblower is a power tool for
spraying chemicals, some special safety
precautions must be observed as with
any other power tool to reduce the risk of
personal injury. Careless or improper
use may cause serious or even fatal
injury.
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 3
Assembling the Unit 14
Adjusting the Throttle Cable 17
Harness 17
Fuel 17
Fueling 18
Information Before You Start 20
Starting / Stopping the Engine 20
Operating Instructions 23
Calculating Required Quantity of
Solution 23
Metering Unit 24
Dusting and Spreading Mode 26
Filling the Container 29
Working 30
After Finishing Work 30
Storing the Machine 31
Engine Management 32
Replacing the Air Filter 32
Adjusting the Carburetor 33
Spark Plug 34
Engine Running Behavior 35
Rewind Starter 35
Inspections and Maintenance by
Dealer 35
Maintenance and Care 36
Main Parts 38
Specifications 40
Maintenance and Repairs 41
Disposal 41
STIHL Incorporated Federal
Emission Control Warranty
Statement 41
Trademarks 43