Need help?Do you have a question about the Stihl SR 5600 and is the answer not in the manual?
Explains pictograms and text symbols used for manual navigation.
Covers essential safety rules, user responsibility, and physical/mental requirements.
Describes suitable applications and approved accessories for the mistblower.
Details required protective clothing and safety gear for safe operation.
Provides guidelines for safely handling plant control chemicals.
Steps for preparing and filling the container with solution.
Safe operating practices and environmental considerations during use.
Instructions for proper storage of the sprayer and solution.
Guidelines for product disposal and safely transporting the unit.
Precautions, steps, and safety for fueling the machine.
Checks before starting and step-by-step guide for starting the engine safely.
Safety for assistants and information on special attachments like dusting.
Guidance on how to correctly hold and control the power tool during use.
Rules for safe operation, including directing air blast and emergency procedures.
Awareness of obstacles, conditions, and exhaust fumes during operation.
Steps to take after finishing work, including cleaning and securing the unit.
Information on vibration-induced circulation problems and usage limits.
Guidelines for servicing, authorized repairs, and using replacement parts.
Step-by-step instructions for mounting the elbow component.
Instructions for mounting the control handle and extension tube.
Instructions for connecting and securing the liquid hose.
How to adjust the control handle for comfortable operation.
Instructions for attaching and adjusting the harness straps for a secure fit.
How to adjust harness and procedure for emergency unit removal.
Details on fuel, oil mix, STIHL MotoMix, and mixing guidelines.
Instructions for storing fuel and the step-by-step process for filling the tank.
Checks for air intake grille and throttle cable before starting.
Step-by-step instructions for starting and safely stopping the engine.
Procedures for starting cold and warm engines, including cranking technique.
Adjusting idle, stopping engine, and correcting engine flooding.
How to calculate area, active ingredient, and total solution volume.
Determining walking speed and calculating the required discharge rate.
How to adjust stop cock and metering knob for flow control.
Tables showing discharge rates based on settings and spray tube angles.
Procedure for checking flow rate and actions for deviations.
Step-by-step instructions for filling the container with spray solution.
How to operate for mistblowing and description of spray jet patterns.
Instructions for cleaning the air filter when engine power is reduced.
Default setting and how to adjust idle speed for smooth operation.
Diagnosing and correcting erratic idling or poor acceleration.
Adjustments for high altitude and how to check the spark plug.
Step-by-step guide for removing and installing the spark plug.
Proper procedure for fitting and tightening the spark plug.
Instructions for storing the machine safely, including long-term storage.
Maintenance chart and list of parts subject to wear and tear.
Tips to reduce unnecessary wear and damage to the power tool.
Technical details of the engine, ignition, and fuel system.
Details on container capacity and spray width.
Defines user vs. dealer service work and using approved parts.
Labeled diagram identifying all main parts of the sprayer.
Instructions for environmentally friendly disposal of STIHL products.
To Next Page
General
