SR 5600
English
10
N Slip hose clip over the end of the
short hose.
N Push the liquid hose (1) onto the
stub on the metering unit and
secure with a hose clip.
N Use hose clips (4) to secure
hose (1) from the container and
hose (3) to the metering unit to the
stubs on the stop cock.
N Close the stop cock (lever at right
angle to control handle).
N Fill up with water and check all hose
connections for leaks.
Adjusting the Control Handle
N Put the unit on your back.
N Loosen the clamp screw (1).
N Move the control handle (2) along
the tube to the most comfortable
position.
N Tighten down the clamp screw (1)
firmly.
Attaching the Harness
N Attach strap hook to the backplate.
Adjusting the Harness
N Pull the ends of the straps
downward to tighten the harness.
Harness
To Next Page
Loading...
