6 Maintenance
Safety regulations for maintenanc
e
Safety regulations for maintenance
General information
To prevent accidents during maintenance and
repair work, all necessary safety measures
must be taken, e.g.:
• Ensuring that unintentional movement of
the industrial truck is prevented.
• Ensuring that a raised lift
ing accessory
cannot be lowered when work
is being
carried out beneath it.
Preparation for mainte
nance
Jacking up
The industrial truck m
ustbejackedupfor
some maintenance work
. Make sure that
the industrial truck i
s only jacked up on level
surfaces, and is secur
ed against rolling and
dropping.
HPS20_25_020
Jacking up at the cha
ssis
– Position the industrial truck with the fork tips
against a wall.
– Jack up the industrial truck until the steering
rollers are no longer in contact with the
ground.
– Secure the industr
ial truck.
50
50988046007 [EN]
To Next Page