EasyManua.ls Logo

Stinger Card - Laser Speed Traps and Protection

Stinger Card
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you have equipped your Card with Stinger Laser modules, it can protect you against speed traps carried out with laser guns
**
.
Stinger Laser offers two forms of protection against laser beams. Laser Alerting
**
involves a visual and audio alarm in case your car gets
shot at by laser. LaserShielding
**
takes the protection further: your Stinger can pull up a protective shield of (invisible) light, making it
virtually impossible for laser guns to measure your speed. LaserShield
®
is so advanced that even modern side laser systems (along side the
road, e.g. incorporated in the guard rail) can be blocked effectively (optional installation required).
*
Note: The LaserShield
®
is for use where permitted.
Note: Even if you own a Card version capable of the LaserShield
®
functionality
**
it initially will be switched off. To activate it, go to the
Selection Mode (see page 7). Before using the LaserShield
®
please check your local legislation.
The moment your Card recognises a laser, the LA (LaserAlerting) LED will start fl ashing
and a distinct audio alarm will sound. All of the red Level LEDs will fl ash also.
Laser Alerting*
With LaserShield
®
on stand-by, your Card will instantly project a ‘shield’ of
invisible laser light in front of your car. This shield will remain up for a maximum
of 6 seconds starting from the initial Laser Alert. After this ‘Shield-up Time’
the LaserShield
®
protection will automatically end, enabling the speed gun to
measure your speed. The LaserShield
®
will never be active when your speed is
below 30 km/h (or 19 mph).
LaserShield
®
*
Laser speed traps
* Available where allowed
** Not available on BASIC E.U. VERSION of the Card.
12

Related product manuals