HD Antenna
All relevant microwaves you encounter are
analyzed in patterns, frequencies and amplitudes
by your Stinger’s HD Antenna, which uses a phased
array radar in the form of a patch antenna for the
receiver section. It is extremely slim, particularly
accurate and hypersensitive.
Freedom Laser Center
All laser activities – transmitting and receiving
– are coordinated in the Freedom Laser Center.
The Freedom Laser Center drives a maximum of
fi fteen Lasers, which do the actual transmitting
and receiving of laser light: sending laser Safety
Signals, Laser Alerting* (detection and warning) and
LaserShielding*.
Card, Card Holder and PC Interface
Your Card is easy to operate using the fi ve
touch keys on its top surface. Also, all relevant
information will be displayed on your Card by
means of colour coded LEDs. Using Card in
your car requires the supplied Card Holder. The
(optional) PC-Interface will enable you to connect
your Card to a Mac or PC.
Card is a modular system. This not only has the advantage that Card can easily be confi gured to your personal wishes, but also makes it
more ‘future proof’. If Stinger makes a new module for Card available, it can easily be clicked into the system. Software updates can simply
be downloaded via the Stinger Desktop. Your Stinger can be equipped with the following modules:
Splitter Cable
Use the Splitter cable to connect modules such as
the HD Antenna and the Freedom Laser Center to
the Card Holder.
3The modules
*Not available on BASIC E.U. VERSION of the Card.
To Next Page
Loading...