EasyManua.ls Logo

Stinger MT Series - Bridging Two Amplifiers; Bridging Connection Guide

Stinger MT Series
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Bridging (Connecting) Two Amplifiers
LIMITED WARRANTY
Stinger warrants this product to be free of defects in materials and workmanship for a period of one (1) years from
the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an
authorized Stinger dealer in the United States of America only. Should service be necessary under this warranty for
any reason due to manufacturing defect or malfunction, Stinger will (at its discretion), repair or replace the defective
product with new or remanufactured product at no charge. Damage caused by the following is not covered under war-
ranty: accident, misuse, abuse, product modication or neglect, failure to follow installation instructions, unauthorized
repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages
and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear
and tear is not covered under warranty.
INTERNATIONAL WARRANTIES:
Products purchased outside the United States of America are covered only by that country’s Authorized Stinger
reseller and not by Stinger. Consumers needing service or warranty information for these products must contact that
country’s reseller for information.
Stinger is a Power Brand of AAMP Global
15500 Lightwave, Clearwater, Florida 33760
© 2022 AAMP Global
MCAMP-IG REV 102622
Connect Bridge Out on the Primary amplier to Bridge In on the Secondary amplier.
Connect the Negative speaker output on the Primary amplier to the Negative speaker output
on the Secondary amplier. Connect the Positive speaker output of the Primary amplier to the
positive speaker terminal. Connect the Positive speaker out put of the Secondary amplier to the
negative speaker terminal. 2 ohm minimum! All adjustments are made on the Primary amplifier.
STOP! Please DO NOT return to seller
For help with installation, replacement parts, warranty or returns, please
contact us directly at 727-732-3114 or support@stingerelectronics.com
®

Related product manuals