Do you have a question about the Stinger SPX700X4 and is the answer not in the manual?
Channels | 4 |
---|---|
Minimum Impedance Unbridged | 2 Ohms |
Minimum Impedance Bridged | 4 Ohms |
THD at Rated Power | <0.05% |
Signal to Noise Ratio | >90dB |
Damping Factor | >200 |
Input Sensitivity | 200mV - 6V |
Crossover Frequency | 50Hz - 500Hz |
Bass Boost | 0 - 12dB @ 45Hz |
Crossover Type | Variable High-Pass/Low-Pass |
Details technical specifications for the 5-channel amplifier, covering power output and load requirements.
Explanation of controls for crossover, sensitivity, frequency, configuration, and status.
Explanation of crossover, sensitivity, frequency, subwoofer, phase, and boost controls.
Details on configuration options, remote level control, inputs, and power status indicators.
Step-by-step instructions for setting up and tuning the amplifier system for optimal performance.
Addressing issues where the amplifier enters protection mode or shuts down frequently.