EasyManua.ls Logo

Stinger SPX700X4 - SPX700 X4 Amplifier Specifications

Stinger SPX700X4
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2019 Stinger • www.stingerelectronics.com
Amplier Owner’s Manual
Frequency Response: ± 1dB from 20Hz to 20kHz
Signal to Noise Ratio: >110dB
High and Low Pass Crossovers: 12dB per Octave
Low Pass Crossover Range: 40Hz to 400Hz
High Pass Crossover Range: 40Hz to 400Hz
Input Range: 200 millivolts to 12 volts
Typical Efciency: 80%
Damping Factor: Greater than 200
Recommended Fuse Size: 60 amp
Power/Ground Wire Size: 8 Gauge
Dimensions: 206mm L x 120mm W x 41mm H
8.1” L x 4.73” W x 1.6” H
Specications
Specications
RMS Power (14.4Vdc ≤1% THD):
125 x 4 @ 4 ohm Stereo
175 x 4 @ 2 ohm Stereo
125 x 2 @ 4 ohm Stereo +
350 x 1 @ 4 ohm Bridged*
(Rear Channels only)
Lowest Recommended Load:
4 ohm Bridged* or 2 ohm Stereo
*Only Rear Channels controlled by
Remote Level Knob.
SPX700x4
SPX700x4
SPX700x4
SP X700x4
SPX700X4
4 Channel Power Amplier
8.8in/223.4mm
4.73in/120mm
1.6in
41mm
8.1in/206mm

Other manuals for Stinger SPX700X4

Related product manuals