Instructions (Cont.)
Dehumidifying mode
IMPORTANT!
For best efficiency in dehumidifying mode,
make sure that windows and doors are kept closed.
• Press the MODE button until the dehumidifying mode indicator illuminates.
• The unit will automatically set the fan motor to low speed and maintain the
room temperature at 2°C lower than the current room temperature (within
the 16°C to 31°C range).
Fan mode
• Press the MODE button until the fan mode indicator illuminates.
• Press the SPEED button to select the fan speed.
Timer operation
The air conditioner has a 24 hour timer, which you can set to start the unit at
a later time, or to switch off the unit automatically.
On-Timer setting
• With the unit switched off (but power supplied), press the TIMER button
once to activate the timer: the timer indicator will illuminate and “01” will be
flashing on the display screen. To set the timer to 1 hour, press the TIMER
button again. The unit will start operating in 1 hour.
• To set the timer to 2 or more hours, press the TEMP- ( ) or TEMP+
( ) button repeatedly to set the number of hours after which you want
the unit to start operation.
• Press the TIMER button again to confirm the set time. The unit will display
the number of hours after which it will start operating.
• To cancel the set time, press the TIMER button a third time.
Off-Timer setting
Use the same procedure as above, but while the unit is switched on, to set
an auto-off time.
Airflow adjustment
Move the air outlet grille slightly up or down to adjust the airflow in these
directions.
To Next Page
Loading...
