Make sure the mounting wall is of sufficient strength to sustain
the weight of the unit (45kg) while in use.
If you are unsure you should contact a qualified tradesperson for installation.
This dryer is heavy and if not installed correctly it has the potential to fall and
cause injuries.
Step 2:
Step 1: Fix two metallic hooks onto the wall which align with the mounting
slots of the dryer. (Fig.1)
Notice:
Wall bracket slots
Place the plastic supports into their slots located on the bottom corners
at the back of the dryer, and turn them 90° to lock them into position.
These help hold the dryer away from the wall and allow sufficient airflow
behind the dryer. (Fig.2)
14
Fig. 2
To Next Page
Loading...
