13
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-BGC PRODUCT CODE: 60165 06/2018
Benchtop preparation
• Make sure the kitchen area is dry and there is sufcient ventilation and
easy access to all control elements.
• Do not install the cooktop near curtains or other ammable materials.
• If you have (or plan to have) a rangehood tted above the cooktop,
check in the rangehood instructions that you will have the required
clearance before starting with the installation.
• To install the cooktop in your benchtop, make an opening with the
dimensions given below (Fig. 2).
• The required clearances for the cooktop are illustrated on page 12 (Fig. 1).
Installation (Cont.)
Fig. 2
• IMPORTANT: You must have a gap of at least 25mm between the
underside of the appliance and any surface underneath it (Fig. 3).
Fig. 3
To Next Page
Loading...
