Installing the machine
Let’s get your new front load
washing machine ready to use!
Quick Start Guide
Model: STR-FL80
Preparation
Washing
1
1
6
2
2
7
3
3
8
4
4
Temp.
Spi n
Speed
+Rinse
Delay
Star t
Temp.
Spi n
Speed
+Rinse
Delay
Star t
5
5
7
2
3
Plug in the machine.
Open your water tap.
Load your washing into the machine
- page 23 in the instruction manual has
useful hints to help you with this.
Close the door.
Add detergent to the drawer – nd all the
details on page 19 in the instruction manual.
Select a program – all program details are
provided on page 20 in the instruction manual.
Press an option button if you want to adjust
the water temperature, spin speed, number of
rinses, or set a delay start.
Press the Start/Pause button to start up.
CAUTION! This washing machine is extremely heavy – transport it with care! A team lift or
mechanical aid is required when moving it.
WARNING! Before installing the washing machine, you must remove the transport bolts from the
back of the housing and cover the holes with the transport hole plugs provided. The four bolts
hold the drum in place during transport but they must be removed before use so the drum can
move during the wash and spin cycles.
This washing machine must be installed by a competent person. Installation involves removing the
transport bolts, levelling the machine, connecting it to your cold water supply and installing the
drain hose. Please refer to pages 10-15 in the instruction manual for comprehensive instructions.
1
Nearly done! Just a bit more on the
other side of this page...
6
8
To Next Page
Need help?
General
