EasyManua.ls Logo

Stirling STR-FLW80W - Detergent Drawer and Door Seal Cleaning

Stirling STR-FLW80W
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
AUS
AFTER SALES SUPPORT
1300 112 534
tempo.org/support
MODEL: STR-FLW80W PRODUCT CODE: 708821 06/2022
Other Useful Information (Cont.)
Cleaning the door seal and glass (after each wash)
After each wash:
Wipe the glass and seal to remove lint and stains. A build-up of lint can cause leaks.
Check for coins, buttons and other small objects in the seal creases (Fig. 17) and
remove them.
Leave the door slightly ajar so the inside can dry properly. This will also help prevent
the development of mould or odours.
Cleaning the detergent drawer (when required)
Remove detergent residues regularly. The detergent dispenser may be removed for
cleaning.
Pull open the dispenser drawer until you feel a resistance. Press down the release
catch and at the same time pull the drawer right out of the machine (Fig. 14).
Remove the siphon from the compartment and clean it.
Clean the drawer using a brush and warm water (Fig. 15).
Use a bottle brush to remove detergent residues from inside the housing (Fig. 16).
Wipe all parts dry with a clean cloth, then reinstall the drawer back into its space.
NOTE: Do not use any solvents, alcohol, harsh chemicals, alkaline or abrasive
cleaning agents, or sharp objects, to avoid damaging the surface.
Fig. 14 Fig. 15 Fig. 16
Fig. 17

Other manuals for Stirling STR-FLW80W

Related product manuals