Iron lock
Put the iron on the thermal insulation stand of unit base, then push the iron lock to “ ” position to lock the iron on
the unit base. To unlock, push the iron lock to “ ” position, then you can remove the iron to iron the clothes. The
whole steam station can be lifted up by grasping the iron’ s handle after the iron being properly locked on the unit
base (see Fig.1)
Steam trigger
After pressing down the power switch and choosing the desired steam rate, it indicates the steam can be used for
ironing when the steam rate indicator changes from flashing to illuminating. At that time, press the steam trigger
with a little force, the steam will be sprayed from the soleplate continuously (see Fig.2). When loosen the steam
trigger, the appliance can only be used for dry ironing without steam.
Shot of steam
Press the steam trigger twice within 1 second to activate the shot of steam function and then you can use the shot of
steam to remove the tough wrinkle.
Refill indicator
If less water in the tank, the indicator will illuminate, following with one “D” sound of buzzer, the steam generator
stops working. It prompts that you need to add water into the tank. At that time, you need to remove the water tank
and refill it with water through the filling aperture (see Fig.3), then replace the water tank back in position.
To Next Page
Loading...