The STO N SHO SNS 209 is an aftermarket accessory designed for 2020-2022 Range Rover/HSE/Autobiography models, providing a removable front license plate mounting system. This device allows vehicle owners to display a front license plate when required by law, and then easily remove it for aesthetic purposes, car washes, or track events, without leaving unsightly holes or permanent modifications on the vehicle's bumper.
Function Description:
The core function of the STO N SHO SNS 209 is to offer a discreet and removable mounting solution for a front license plate. It consists of two main components: a base plate that permanently attaches to the vehicle's bumper and a license plate holder that slides into the base plate. The license plate holder is secured by a spring-loaded pull pin mechanism. When the license plate is needed, the holder is slid into the base plate until the pull pin locks it in place. To remove the license plate, the user simply pulls the ring on the pull pin outward and slides the holder off the base plate. This design ensures that the license plate can be attached and detached quickly and easily, providing flexibility for vehicle owners who want to maintain a clean front-end appearance or avoid damage during certain activities.
Important Technical Specifications:
- Compatibility: Specifically designed for 2020-2022 Range Rover/HSE/Autobiography models.
- Mounting Hardware:
- License Plate mounting Screws: (4) 6mm X 12mm (Phillips head) and 6mm nuts (10mm wrench size)
- Base plate mounting screws: (2) 6.3mm X 20mm with washer
- Tools Required for Installation:
- 10mm sockets with ratchet (1/4-inch drive preferred, 3/8-inch drive acceptable with caution)
- Phillips Screwdriver
- 10mm wrench
- 1/8 inch drill bit and drill
- Ground Clearance Impact: The bracket lowers ground clearance by approximately 1/2 inch. This is a critical specification that users must consider, especially when navigating steep driveways, speed bumps, or high curbs.
- Material: While not explicitly stated, the components appear to be made of durable metal, likely powder-coated for corrosion resistance, given the outdoor application. The pull pin mechanism suggests a robust spring and pin material.
Usage Features:
- Removable Design: The primary feature is the ability to quickly remove and reattach the license plate holder. This is ideal for car shows, photography, or simply to enhance the vehicle's aesthetic when a front plate is not legally required or desired.
- Pull Pin Mechanism: The spring-loaded pull pin provides a secure locking mechanism for the license plate holder, ensuring it stays in place during driving. The ring on the pull pin makes for easy manipulation during removal and reattachment.
- Double-Sided Tape for Alignment: During installation, double-sided tape on the base plate assists in holding the bracket in place for accurate alignment before drilling pilot holes.
- Adjustable Leveling: The license plate holder can be slightly adjusted by rotating the frame at designated arrows to ensure the plate sits level on the bumper. This allows for fine-tuning after initial installation.
- Installation Skill Level: Classified as requiring a "Medium skill level." Users are advised to seek professional installation from a local Dealer or Body shop if unsure.
- Cautionary Use Cases:
- Automated Car Washes: The device must be removed prior to entering automated car washes to prevent damage.
- Steep Driveways/Exits: Exercise care when entering or exiting steep driveways to avoid damage due to reduced ground clearance.
- Parking Stops/High Curbs: Users must stop well before parking stops or high curbs to prevent damage.
- Track/Racing: The device must be removed prior to running on a track or racing.
- Road Conditions: The manufacturer explicitly warns that parking stops, high curbs, speed bumps, potholes, steep driveways, and other road abnormalities can cause damage to the STO N SHO and the vehicle.
Maintenance Features:
- Lubrication Requirement: The rods and spring-loaded pull pin require periodic spraying with WD-40 or any other silicone-type spray lube. This is crucial for smooth operation and to prevent the pull pin from failing or the rods becoming difficult to remove or reinsert.
- Environmental Considerations: In harsh environments, such as areas with salted or sanded roads in winter, this lubrication maintenance should be performed on a regular basis.
- Warranty Implication: Failure to perform the required maintenance may void the product's warranty.
- Limited Lifetime Warranty: Covers manufacturing defects in material and workmanship for the life of the product.
- Pull-Pin Warranty: The pull pin specifically has a separate warranty period of 1 year (12 months) from the date of purchase.
- Exclusions: The warranty does not cover damages resulting from improper installation, road conditions, driving, care, accident, mishandling, abuse, negligence, or repair by unauthorized parties. It also does not cover costs for removal, transport, or installation of replacement products.
- Voided Warranty: The warranty is void if the product was not purchased from an authorized dealer or reseller.
- Maintenance Clause: Failure to perform required maintenance (e.g., lubrication) may void the warranty.
- Disclaimer: STO N SHO LLC is not responsible for any damages to the bracket or vehicle due to improper installation, road conditions, driving, or care. The company also disclaims responsibility for incidental or consequential damages to the maximum extent permitted by law.
In summary, the STO N SHO SNS 209 offers a practical and aesthetically pleasing solution for front license plate display on specific Range Rover models, emphasizing ease of use and a clean vehicle appearance. However, it places a strong emphasis on user responsibility for proper installation, careful driving, and regular maintenance to ensure longevity and avoid damage to both the device and the vehicle.
Need help?
General
To Next Page
