EasyManua.ls Logo

Stobag VENTOSOL VS5100 - Care and Maintenance

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating instructions
EN-16
All rights to make modifications are reservedwww.stobag.com
EN-17
• Theelectricdriveisttedwithathermalprotectionswitchandisnotdesignedfor
permanent operation. If the drive overheats, because of frequent extensions and retrac-
tions, for example, it will switch off automatically, no matter which position the awning
is in. The electric drive will operate again after a cooling-off period of 10 - 45 minutes,
depending on such factors as the outside temperature, power output and roller posi-
tioning.
• Sunprotectionsystemswithelectricdrivescannotberetractedinapowerfailure,
caused by a storm, for example. If you leave the house for a longer period for holidays
or the weekend, for example, we recommend setting the automatic control system to
manual operation.
The sun protection system must be operated in accordance with these instructions. Other
uses are improper. STOBAG cannot accept liability for damage caused by improper use.
Care and maintenance
Mechanical components are maintenance free. Occasional lubrication of moving parts
(joints, lateral bearings) with an appropriate lubricant (silicon spray) can extend the work-
ing life of the unit. The powder-coated framework can be cleaned with a damp cloth. Do
not use any aggressive cleaning materials.
If there is a control system, the mechanical wind sensor should be checked periodically
for damage from external causes and that it is functioning. Check that it turns in the wind.
Cleaning awning fabrics
The acrylic fabric is impregnated. If it becomes necessary, clean it as follows: Small spots
can be rubbed off with a clear rubber eraser or brushed off when dry. If slightly dirty, the
fabric can be washed with diluted soap solution (5%, approx 30 °C) and a soft brush. It
should then be rinsed thoroughly with clear water. It may be necessary to repeat the proc-
ess. Only wind the awning in when it is completely dry. For heavier dirt, we recommend
a specially developed fabric cleaner, used in accordance with its instructions. A pressure
cleaning machine should never be used.
General comment on awning covers
Acrylic fibre awning fabrics are high-performance products with high light and colour resistance and mould-
inhibiting, water and dirt-resistant finish. They will provide many years of safe, comfortable protection from the sun.
Despite the high level of technology applied in the manufacture of awning fabrics, however, the treatment of the
fabric produces effects that cannot be avoided. These small cosmetic defects do not affect the life or the functioning
of the awning cover. These unavoidable effects are explained in the consumer information that follows:

Related product manuals