Stocker 25027 - Setting and Operation Guide

Digital Water Timer
Art. 25027
1. Set the day
Cursor under MO is blinking which means beginning
the setting mode of days of week, press Zone 1 or
Zone 2 button to select the current day of the week
and press button Item to save your selection. Cursor
stops blinking, then program proceeds further to set
the current time (the hour figures start flashing).
2. Set the time
The hour reading is flashing: press button Zone 1 to
increase the digital value (or press button Zone 2
to decrease the digital value) until the current hour
is entered, press button Item to save the value.
Subsequently, minutes reading is flashing: press
button Zone 1 to increase the digital value (or press
button Zone 2 to decrease the digital value) to set the
current minutes and then press button Item to save
B.
SETTING & OPERATION:
First time setting:
when battery is installed, days of week from Monday
(MO) to Sunday (SU) and titles of START, RUN TIME, MIST
CYCLE and CYCLE TIME are all shown on the display.