Stokke® PIPA™ by Nuna®30 EN
• Vehicle belts must lay at under lock o.
• If vehicle only has a lap belt, then put lap belt under blue locko.
Check the installation.
• Belts must be tight.
• Base should not move side to side more than 1” at belt path
• Bubble must be touching line.
• Belts and buckles must not interfere with attachment of carrier to base.
• Vehicle belts must lay at under lock o.
• It is acceptable to install with both LATCH (lower attachments) and the vehicle belt.
• After child is properly secured in carrier, press carrier on base and listen for a click.
• Pull on carrier to verify proper installation.
Your child may not be protected in the event of a crash or
sudden stop if you do not check and verify that the seat is
securely attached.
click
click
check
To Next Page
Loading...
