Stokke PIPA - Advanced Installation and Checks; Stability Leg Usage and Adjustment

Stokke® PIPA™ by Nuna® 31EN
• To release the car seat, pull the car seat up
while squeezing the car seat release button.
Stability Leg
• Refer to vehicle owner’s manual to determine if stability leg can be used over the
vehicle storage compartment.
• Do not use if stability leg lifts base o seat.
Do not use stability leg to
recline the base. The recline
adjustment feature is meant
to recline the base.
• Always store stability leg when not in use.
• Unfold the stability leg from storage compartment.
• After correctly installing the base on the vehicle seat,
extend the stability leg to oor.
• Stability leg should make rm contact with the
vehicle oor, enough to remove looseness
and for the indicators to show green.
• The stability leg has 12 positions.