3
3
2
2
1
1
4
Rest unl now? YES
Scenario: The driver card was withdrawn at the end of the last working day and
inserted when the new working day started.
1. Conrm with YES.
2. Select and conrm End country for the last
working day.
3. Select and conrm Begin Country for the
current working day.
Note! Step 2 and 3 will not be used if
the me between card withdrawals and
inseron is less than nine hours.
4. Conrm if you want a printout or not.
5. Select and conrm YES to conrm the
entries or NO to clear or modify entries.
6. You are now ready to drive.
Manual Entries
During the manual entries procedure you can use the E buon to move back
to previous selecon or backwards in display menu before conrming.
1. Insert the driver card and wait unl the
tachograph processes the driver card data.
The display shows the name of the card
holder, the date and me for the last card
withdrawal and local me/UTC o-set.
2. Connue with Rest unl now? YES or NO. Note: Aer me out (1 or 20 min),
manual entries are no longer possible.
Rest unl now? NO
Scenario: You arrived at 15.23, 23/11 and
withdrew the card. You performed other work
unl 17:00 and rested unl 20.37, 23/11 when
you inserted the card again.
23/11
15:23
23/11
17:00
23/11
20:37
1. Select and conrm NO.
2. Conrm Add manual entries with YES.
3. The following is displayed. The date
and local me is shown for the last card
withdrawal.
23/11
15:23
4. Select and conrm acvity Work.
Adjust and conrm the date when the
acvity ended (23/11). Default me is set to
inseron me.
Adjust and conrm the me (hour and
minute) to when the acvity ended.
23/11
15:23
23/11
15:23
20:37
23/11
23/11
15:23
23/11
17:00
5. The following is displayed.
23/11
17:00
6. Select and conrm acvity Rest. In this
example nothing needs to be adjusted.
23/11
17:00 20:37
23/11
7. Connue with step 4 in chapter Rest unl
now? YES.
For full details on the SE5000-8.1
funconality we refer to the Driver &
Company Manual or visit www.SE5000.com
YES
NO
YES
YES
NO
Welcome
Smith
Rest until
now?
Rest until
now?
Add manual
entries
End country
Sweden
Begin country
Sweden
Entries
printout?
Conrm
entries?
Ready to
drive
Driver Quickguide
end
shift
end
shift
Last withdraw
15:23 22/11 2010
UTC+01h00
15:23 22/11 2010
Press and hold the buon
marked 1 (if you are the
driver) unl a card tray
pops out. Press 2 if you are
the co-driver.
Press the card in place in
the tray.
Close the tray by pushing
it gently forward.
Insert the card with the
chip facing upwards.
Insert your card
Withdraw (eject) your card
Press and hold the buon 1
if you are the driver. Press 2
if you are the co-driver.
The display will ask you
to select end country. Use
arrow buons to move to
your end country. Conrm
by pressing the OK buon.
Driver Displays (DDS enabled)
The tray will open. Press
the card underneath trough
the opening in the tray and
the card will pop out.
End country
Sweden
SE5000-8.1, 105010P/01R01 EN
The vehicle must be sta-
onary when you insert or
withdraw a card.
STONERIDGE - EVERY ANGLE COVERED
Use the T or R buon to scroll up/down to show one of the displays below.
For more details on Driver Displays, please visit www.se5000.com.
Current speed
Speed & Odometer
Time Le Resng unl more
driving me is available
Co-driver’s current acvity
(available)
Driver’s current acvity (resng)
Drive me available aer
this break/rest me
Time Le to Rest
Time le driving view is shown
Time le driving unl next acvity
Next acvity (start of daily rest)
How long the resng me must
be to get more driving me
Time Le to Drive
Working Time
Weekly working me
Indicate that driver
informaon is
shown
Working me since last break
Daily working me
Daily break me
Driver’s current acvity
Driving me since last break/rest
Driver’s acumulated break me
Local me
Duraon of the co-driver’s acvity
Co-driver’s current acvity
Overview
Type of card inserted in tray 1
Odometer
Type of card inserted in tray 2