Need help?Do you have a question about the Storm Shell 44 and is the answer not in the manual?
The Storm Shell Pole Mount is an accessory designed to integrate the 44" Storm Shell TV Hard Cover with a vertical cylindrical pole, providing a robust and secure outdoor display solution. This pole mount allows for the installation of a television within the protective hard cover onto a pole, making it suitable for various outdoor environments where wall mounting may not be feasible or desired. The primary function of this device is to enable the secure attachment of the Storm Shell TV Hard Cover, along with its internal TV bracket, to a vertical pole, ensuring stability and protection for the enclosed television.
The core function of the Storm Shell Pole Mount is to facilitate the secure and stable mounting of a 44" Storm Shell TV Hard Cover onto a vertical pole. This involves a multi-component system that includes a pole mounting plate, U-bolts, and various fasteners. The mounting process begins by preparing the Storm Shell Back, which involves removing the TV bracket's shipping screws and assembling the buckle latches. Following this, the pole mount plate is positioned on the back of the Storm Shell, aligning with pre-drilled holes for the TV mounting arm. This alignment is crucial for ensuring the structural integrity and proper orientation of the mounted system.
Once the pole mount plate is correctly aligned, drill locations are marked on the Storm Shell Back, and holes are drilled through the hard cover body. This step creates the necessary attachment points for the pole mount bracket. The pole mount bracket is then positioned at the desired height on a vertical pole, and U-bolts of appropriate size (1.5", 2.0", 3.0", or 4.0") are used to secure it tightly around the pole. These U-bolts are fastened with M8 nuts, spring washers, and flat washers, ensuring a firm grip on the pole. The selection of U-bolt size depends on the diameter of the specific pole being used, offering versatility in installation.
After the pole mount bracket is securely attached to the vertical pole, the Storm Shell TV Hard Cover is connected to the pole mount plate. This connection is achieved by inserting M6 x 16mm bolts through the back of the pole mount plate and the corresponding drilled holes on the Storm Shell TV Hard Cover body. These bolts are then fastened with M6 nuts from the inside of the hard cover body, creating a strong and integrated unit. Finally, the Storm Shell TV Mounting Bracket, which houses the TV, is connected to the pole mount plate through the TV hard cover body. This final connection uses M8 x 25mm bolts, M8 nuts, spring washers, and flat washers, ensuring that the TV mounting bracket is firmly secured to the pole mount system. The entire assembly is designed to provide a robust and weather-resistant enclosure for the television, mounted securely on a pole.
The Storm Shell Pole Mount offers several usage features that enhance its functionality and adaptability for outdoor display applications. One key feature is its compatibility with various pole diameters, thanks to the inclusion of multiple U-bolt sizes (1.5", 2.0", 3.0", and 4.0"). This versatility allows the mount to be used with a wide range of existing poles, reducing the need for specialized pole infrastructure. The design ensures that the 44" Storm Shell TV Hard Cover is mounted in a vertical orientation, which is standard for most outdoor TV viewing applications.
The mounting system is designed for ease of installation, although it is recommended that two people perform the installation to prevent injury or damage due to the size and weight of the components. The clear instructions, including detailed figures, guide users through each step, from preparing the Storm Shell Back to securing the entire assembly to the pole. The use of standard fasteners and tools, such as Phillips head screwdrivers, sockets, wrenches, and electric drills, means that no specialized equipment is required beyond common household or workshop tools.
The pole mount system is engineered to provide a stable and level platform for the television. The instruction to use a bubble level during the marking of drill locations ensures that the pole mount bracket is installed horizontally, which is critical for the proper display of the television. The robust construction, utilizing various bolts, nuts, and washers, ensures that the hard cover and the enclosed TV are securely fastened, capable of withstanding outdoor conditions. The integration with the Storm Shell TV Hard Cover means that the TV is protected from environmental elements, making it suitable for year-round outdoor use. The ability to install the Storm Shell Front and check the fit of the cover and latches after mounting ensures that the protective enclosure functions as intended.
While the manual primarily focuses on installation, the design of the Storm Shell Pole Mount inherently incorporates features that contribute to its long-term maintenance and durability in outdoor environments. The use of robust materials and fasteners is a primary maintenance feature, as it minimizes the need for frequent repairs or replacements. The various bolts, nuts, and washers are designed to withstand the stresses of outdoor exposure, including wind, vibrations, and temperature fluctuations.
The secure fastening system, involving multiple points of attachment and different types of fasteners, ensures that the components remain tightly connected over time. This reduces the likelihood of loosening due to environmental factors or prolonged use, which could otherwise lead to instability or damage. Regular checks of the fasteners, as recommended for any outdoor mounted equipment, would be straightforward given the accessible design.
The Storm Shell TV Hard Cover itself, which integrates with this pole mount, is designed for protection, thereby reducing the maintenance requirements for the enclosed television. By shielding the TV from rain, dust, UV radiation, and physical impacts, the hard cover extends the lifespan of the television and minimizes the need for cleaning or servicing of the electronic components. The buckle latches, which secure the front cover, are also part of this protective system, ensuring a sealed enclosure.
The modular design of the pole mount, where the Storm Shell Back and the TV mounting bracket are assembled to the pole mount plate, allows for easier access to individual components if maintenance or adjustments are ever required. For instance, if the TV needs to be serviced or replaced, the front cover can be opened, and the TV bracket can be accessed without necessarily dismounting the entire pole assembly. This modularity simplifies potential repair or upgrade processes, making the overall system more manageable for long-term outdoor deployment. The emphasis on proper installation, including ensuring the pole structure can support the load, also serves as a preventative maintenance measure, ensuring the longevity and safety of the entire setup.
General| Depth | 1000mm |
|---|---|
| Material | Steel |
| Color | Black |
| Adjustable Height | No |
| Type | Rack |
To Next Page