Storm Shell 55 - Final Assembly and Component Details; Installing Storm Shell Front and TV Display

10
Figure 7c
4. Install the Storm Shell Front and check that cover and latches fit correctly.
Install the TV Display
Follow the instructions in the Assembly and Installation Instructions for 55” or 65” Storm Shell.
PLEASE NOTE: The following parts included in the Storm Shell TV Mounting Hardware are included
with the Storm Shell TV Hard Cover. When Installing the Storm Shell Pole Mount, some of the
mounting components included with the Storm Shell TV Hard Cover are not used. These are the
components normally used to mount the TV bracket onto a wall. These components are marked
below and are not to be used if using the Storm Shell Pole Mount.
Storm Shell and TV Mounting Bracket Parts