Storm 4-Ball Rolling Thunder - User Manual

Storm 4-Ball Rolling Thunder™ Handle Replacement Instructions
Step 1. Making sure the strap clip is undone, Step 4. Pull entire handle assembly out of the
remove the top bag from the bottom bag. bottom bag base/frame. Make sure the square
outer sleeves are also removed.
Step 2. Remove the bottom bag rack screws, (5)
total. Slide the rack away from handle. Step 5. Save the intermediate wrapped sleeves
that are on the bottom rails. These are very
important and MUST be on the replacement
handle in order for both locking stages to work.
Step 3. Take screws out of handle, (4) total. Step 6. Make sure the replacement handle is fully
collapsed and that the outer sleeves are pushed all
the way up into the handle. NOTE: it will take some
adjusting to get the sleeves to fit into the square
openings.

Summary

Storm 4-Ball Rolling Thunder Handle Replacement

Separate Top Bag from Base

Remove the top section of the bowling bag from the bottom base.

Remove Bottom Bag Rack Screws

Unscrew and detach the bottom bag rack from the handle assembly.

Remove Handle Screws

Take out the four screws securing the handle to the frame.

Extract Handle Assembly

Pull the entire handle assembly and outer sleeves from the base.

Preserve Intermediate Sleeves

Save the wrapped sleeves from the bottom rails for reassembly.

Prepare Replacement Handle

Ensure the new handle is collapsed with sleeves pushed up.

Install New Handle Assembly

Slide the replacement handle into the bag base slots and align.

Reinstall Handle Screws

Replace the four screws removed in Step 3 to secure the handle.

Reinstall Bottom Bag Rack

Position the bottom bag rack and align holes for screws.

Test Handle Functionality

Verify the handle extends, retracts, and locks correctly.

Storm 4-Ball Rolling Thunder Specifications

General

Brand	Storm
Model	4-Ball Rolling Thunder
Category	Travel & Luggage
Language	English