Need help?Do you have a question about the Storz 20711620-1 and is the answer not in the manual?
General| Brand | Storz |
|---|---|
| Model | 20711620-1 |
| Category | Medical Equipment |
| Language | English |
Details specific warnings and cautions for safe and effective operation of the device.
Explains the universal applicability of the UNIDRIVE® motor system with suitable application instruments.
Outlines essential safety measures for installing the system in medical rooms with proper electrical systems.
Details critical safety measures to ensure safe operation during surgical procedures.
Guides users through the process of physically installing and electrically connecting the device.
Explains how to connect the footswitch for operating the UNIDRIVE® system.
Details the process of connecting various application instruments to the motor outputs.
Describes how to adjust the irrigation flowrate using the touch screen interface.
Explains how to adjust the irrigation flowrate using the footswitch pedals.
Covers the initial steps for powering on and starting the UNIDRIVE® system.
Details how to activate the main operating function of the UNIDRIVE® system.
Explains how to select the correct motor connection (M1 or M2) for the attached instrument.
Outlines the process for setting up the operating mode for different applications.
Guides users on setting the desired maximum rotational speed for the motor.
Details the various functions of the footswitch in DRILL operating mode.
Explains how to set the maximum rotational speed for the shaver handpiece.
Outlines the footswitch functions specifically for the SHAVER operating mode.
Guides users through the process of calibrating the touch screen for accurate input.
Lists and explains potential error messages and their causes.
Guides users on how to reset the device to its original factory default settings.
Details the procedures for cleaning, disinfecting, and sterilizing the equipment and accessories.
Provides recommendations and warnings for sterilizing reusable tubing.
Explains the validated steam sterilization method for the tubing sets.
Details the four phases of the fractionated prevacuum sterilization process.
Outlines procedures for repairing defective devices by authorized personnel.
Guides users on identifying and rectifying various malfunctions and errors.
Lists specific error codes, their causes, and recommended troubleshooting steps.
Addresses common operational issues and provides solutions for them.
Offers solutions and actions to resolve device problems.
Provides detailed information on the device's compliance with electromagnetic compatibility standards.
To Next Page