Storz UG 130U - User Manual

delgadojudyAug 5, 2025

Why are the end devices not working on my Storz UG 130U Outdoor Cart?

B
bennettangelaAug 5, 2025
If the connected end devices aren't working with your Storz Outdoor Cart, first, ensure the equipment cart is turned on using the central mains switch. Then, check that each end device is powered on. Also, verify that the power lines of both the end device and the equipment cart are properly connected. If there's no output voltage at the network distributor, check its interface connection to the central mains switch, disconnect it from the network, and remove all end devices from the output. If there's still no output, try connecting the network distributor to another power supply and check the automatic cutout of the supply circuit.

Summary

General Information

Description of the Device

Provides an overview of the COR equipment cart, its features, and maneuverability.

Optional Accessories

Discusses how the COR cart can be adapted with optional accessories to meet individual needs.

Safety Instructions

Explanation of Warnings and Cautions

Explains the meaning and importance of Warning, Caution, and Note symbols and terms used in the manual.

General Safety Information

Covers safety guidelines, including prohibition of unauthorized modifications and recommendations for assembly.

Intended Use and User Qualification

Details the intended applications of the cart and the required qualifications for its users.

Commissioning

Affixing and Removing Shelves;Drawers

Instructions for installing and removing shelves and drawers, including safety precautions.

Securing Devices

Explains how to use stabilizing elements to secure devices on the cart to prevent falls.

Transport Position

Details the necessary steps to prepare the cart for safe transportation, including switching off devices and releasing brakes.

Power Supply Connection and Disconnection

Provides instructions on how to safely connect and disconnect the equipment cart to the power supply.

Maintenance

Reprocessing and Disinfection

Covers manual wipe-down disinfection procedures, emphasizing safety and material compatibility.

Maintenance and Safety Checks

Outlines regular maintenance requirements, safety checks, and cleaning procedures for the equipment cart.

Servicing and Repair

Specifies that maintenance and repairs must be performed by authorized KARL STORZ personnel using genuine parts.

Disposal

Provides guidelines for the proper disposal of the equipment and its parts as electronic waste according to WEEE directive.

Limitation of Liability

Outlines the conditions under which KARL STORZ accepts liability for the equipment's performance.

Warranty and Standard Compliance

Details warranty terms, standard compliance with IEC 60601, and CE directive compliance.

Technical Description

Configuration and Base Module

Describes the configuration options and the components of the base module, including castors and slots.

Cover and Boom Package

Details the components and features of the cover and the boom package, including power supply and cable management.

Shelves, Trays, and Platforms

Explains the use of surfaces for working and placement, emphasizing load limits and securing devices.

Drawer Units and Electronic Equipment

Covers the design and features of drawer units and the electronic equipment, including isolation transformer and earth leakage monitor.

Isolation Transformer

Provides detailed technical specifications and features of the isolation transformer, including safety and compliance information.

EMC Information

Immunity Tests Compliance

Details the compliance levels for various immunity tests according to EN/IEC 60601 standards.

Electromagnetic Environment Guidance

Provides guidance on suitable environments and recommended separation distances for RF equipment.

UG 400 Earth Leakage Monitor

Control and Display Elements

Describes the functions of various LEDs, buttons, and signals on the earth leakage monitor and isolation transformer.

Provisions for Safe Operation

Outlines essential safety regulations for operating the earth leakage monitor and the importance of authorized maintenance.

Care and Maintenance

Details the required annual inspection, cleaning procedures, and safety checks for the equipment.

Spare Parts

COR Plastic Cover, Monitor Mount

Lists a specific spare part, the plastic cover for the monitor mount, with its dimensions and weight.

COR Cover with Logo, Narrow

Lists a spare part: the narrow cover with logo, including dimensions and weight.

COR Handle on Power Boom

Lists a spare part: the handle for the power boom, with dimensions and weight.

COR Power Switch + Cable

Lists a spare part: the power switch with cable, including dimensions and weight.

COR Cover for Locking Device

Lists a spare part: the cover for the locking device, with dimensions and weight.

COR T-slot Rubber Profile for Side Boom

Lists a spare part: the T-slot rubber profile for the side boom, with dimensions and weight.

COR Assembly Set

Lists a spare part: the assembly set, including dimensions and weight.

COR Key for Drawer

Lists a spare part: the key for the drawer, with weight.

COR Non-slip Corners

Lists a spare part: the non-slip corners, with dimensions and weight.

COR Hinge Set

Lists a spare part: the hinge set, with dimensions and weight.

COR Connection Bridge

Lists a spare part: the connection bridge, with dimensions and weight.

COR Hook + Clip for Earth Leakage Monitor Display

Lists a spare part: the hook and clip for the earth leakage monitor display, with weight.

COR 15 A Fuses, Transformer

Lists a spare part: 15 A fuses for the transformer, with dimensions and weight.

COR 20 A Fuses, Transformer

Lists a spare part: 20 A fuses for the transformer, with dimensions and weight.

COR Accessories Kit for UG 520

Lists a spare part: the accessories kit for UG 520, with dimensions and weight.

Medical Electrical Systems

10.1 Warnings

Highlights critical safety warnings related to connecting devices to the ME system and handling components.

10.2 Notes

Provides important notes regarding maximum load for multiple socket outlets and conditions for ME system operation.

10.3 Risks from Incorrect Operation

Explains the risks associated with incorrect operation and the use of non-ME devices with the ME system.

10.4 General Information

Offers additional instructions for ME systems, covering general information and definitions.

10.5 Definitions

Defines key terms used in the manual according to the IEC 60601-1 standard.

10.6 Scope

Defines the applicability of the instruction manual to KARL STORZ configured ME systems.

10.7 Changes to the System

Details the responsibilities and requirements when making modifications to the ME system.

10.8 Accompanying Documents

States that accompanying documents for all installed devices are valid and contain necessary information.

10.9 Components of the ME System

Explains how ME system components are indicated and typically assembled.

10.10 Additional Safety Precautions

Confirms that no additional safety precautions are needed for assembly and installation.

10.11 Installation of the ME System

Provides instructions for the setup and installation of the ME system by qualified personnel.

10.12 Initial Commissioning and Functional Test

Outlines the procedures for initial commissioning and functional testing of the ME system before customer use.

10.13 Electrical Safety Testing

Details the mandatory electrical safety tests, including touch current, leakage current, and patient leakage testing.

Brand	Storz
Model	UG 130U
Category	Outdoor Cart
Language	English

Brand

Storz

Model

UG 130U