RAISED GARDEN BED INSTALLATION GUIDE
RAISED GARDEN BED
INSTALLATION GUIDE
RAISED GARDEN BED INSTALLATION GUIDE
RAISED GARDEN BED
Wingnuts and
Screws x 32
Long Panel x 2
Corner Cap x 4
Corner Angle x 4
Short Panel x 2
COMPONENTS
TOOLS REQUIRED
Phillips Head Screwdriver Pliers Safety Gloves Safety Glasses
BEFORE YOU START
Prior to installation, choose a suitable location on flat ground for your Garden Bed. Measure the area to ensure there is enough
room, a minimum 48” x 36” is required.
To ensure the installation of your Stratco Garden Bed proceeds smoothly you should confirm that all the components listed in
this installation guide have been supplied. Carefully read this installation guide to familiarise yourself with all the steps involved,
and ensure that you have the correct tools and equipment for the job.
NOTE: Use heavy gloves when handling steel sheeting and flashings and never attempt to install the garden bed in windy
conditions.
To Next Page
Need help?
General