Stratford Labs GFP-001

Questions and Answers

J
James TurnerAug 13, 2025
Why does my computer not recognize the Stratford Labs image copier?
- J
  Jaime BellAug 14, 2025
  Your computer may not recognize the Stratford Labs image copier because it is not plugged into a high-speed USB port. To fix this, ensure your computer has USB 2.0 installed. If not, you can upgrade your USB ports, which are available at most electronic stores.
C
caindavidAug 17, 2025
What to do if I have a USB 2.0 port but my computer still won't recognize the Stratford Labs image copier?
- A
  ana67Aug 17, 2025
  Even if USB 2.0 is installed, not all USB ports may be compatible. Check all USB ports to find the 2.0 compatible ports for your Stratford Labs image copier.
E
erikbrooksAug 21, 2025
What to do if Arcsoft PI6 for Stratford Labs copier does not work properly?
- G
  Gina RobinsonAug 21, 2025
  If Arcsoft PI6 is not working properly with your Stratford Labs copier, check for any earlier versions of PI6 already installed. Uninstall any previous versions, and then reinstall Arcsoft PI6.
L
Lisa WolfeAug 25, 2025
What to do if I'm having trouble loading the software and/or driver for Stratford Labs Copier?
- A
  Angela ClarkAug 26, 2025
  If you're having trouble loading the software or driver for your Stratford Labs Copier, ensure your computer is operating on either Windows XP or Vista, as other operating systems may be incompatible.
J
Jack RogersAug 28, 2025
What to do if I have a Windows message that “Windows cannot load Omni SuperCam” for Stratford Labs Copier?
- J
  John WardAug 28, 2025
  If you receive a “Windows cannot load Omni SuperCam” message when using your Stratford Labs Copier, the installation may not have been done in the correct order. To fix this: 1. Unplug the image copier. 2. Uninstall the driver. 3. Uninstall PhotoImpression6. 4. Restart your computer. Then, reinstall according to the manual by installing the driver, restarting the computer, and then reinstalling the PhotoImpression6 software.
K
Kimberly MorrisSep 1, 2025
Why do my slides or negatives look overexposed with Stratford Labs image copier?
- S
  Sarah HuynhSep 1, 2025
  If your slides or negatives look overexposed with the Stratford Labs image copier, wait for the live view window to stop adjusting for exposure, then click “snap shot” or press the copy button. Also, check if your slides or negatives were overexposed when originally developed. Photo adjusting software can also help clean up digitized pictures.
K
kristaburnsSep 5, 2025
What to do if my installation disc for Stratford Labs GFP-001 will not auto start?
- T
  tschwartzSep 5, 2025
  If the installation disc for your Stratford Labs Copier does not auto-start, check if your CD drive is operating properly. If possible, test the disc on another computer to see if it is recognized.
E
Emily PattersonSep 8, 2025
What to do if software driver or PI6 will not install for Stratford Labs Copier?
- A
  Alejandro FernandezSep 8, 2025
  If the software driver or PI6 will not install for your Stratford Labs Copier, contact Affiliated Enterprises (distributor) at 1111 Rose Road, Lake Zurich, IL 60047, call 847-550-9998, or email info@aeicorporate.com to request a new copy of the installation CD.