Need help?Do you have a question about the StreetStrider 3i and is the answer not in the manual?
General| Weight Capacity | 300 lbs |
|---|---|
| Gears | 3 |
| Frame Material | Steel |
| Wheel Size | 20 inches |
| Type | Elliptical Bike |
| Heart Rate Monitor | No |
| Assembly | Required |
Instructions for unpacking and preparing the StreetStrider components before assembly.
Step-by-step guide for assembling and attaching the front wheels to the StreetStrider frame.
Detailed steps for assembling and installing the rear wheel for the StreetStrider 3i model.
Detailed steps for assembling and installing the rear wheel for the StreetStrider 7i model.
Guide on how to install the poles and skis, including height adjustment and clamping.
Instructions for adjusting and setting up both front and rear brake systems for optimal performance.
Steps to install and adjust the rear hub shifter for the 3i model, including cable routing.
Steps to install and adjust the rear hub shifter for the 7i model, including cable routing.
Procedure for aligning the front wheels to ensure they are parallel for proper steering and stability.
How to adjust the stability of the StreetStrider by tightening or loosening kingpin bolts.
Instructions on how to fold the StreetStrider for storage and transport.
To Next Page