Need help?Do you have a question about the StreetStrider 7i and is the answer not in the manual?
Instructions for unpacking the StreetStrider components and preparing for assembly.
Detailed steps for assembling and attaching the front wheels to the StreetStrider frame.
Guidance on installing the rear wheel for the 3i model, including brake rotor alignment.
Steps for installing the rear wheel for the 7i model, focusing on the shifter cassette.
Procedure for attaching the poles and skis to the main frame and adjusting them.
Instructions for adjusting and ensuring proper function of the front and rear brake systems.
Guide to installing and adjusting the rear hub shifter for the 3i model.
Steps to install and adjust the rear hub shifter for the 7i model.
Procedure for aligning the front wheels to ensure they are parallel for optimal performance.
How to adjust the steering stability by tightening or loosening kingpin bolts.
Instructions on how to properly fold the StreetStrider for storage or transport.
Essential safety measures and initial preparation before learning to use the StreetStrider.
Guidance on choosing a safe and suitable location for practicing striding.
Learning to operate the brake levers and grip shifter for effective control.
Steps for safely mounting the StreetStrider and beginning to roll.
Tips on using gears to achieve smooth motion and adapt to varying conditions.
Methods for steering by leaning and practicing controlled stops.
Encouragement to enjoy the activity and its benefits.
General| Type | Elliptical Bike |
|---|---|
| Model | 7i |
| Frame Material | Steel |
| Wheel Size | 20 inches |
| Max Weight Capacity | 300 lbs |
| Foldable | No |
| Gear System | 7-speed |
To Next Page
