EasyManuals Logo

Streetwize SWBCG4 Manual

Streetwize SWBCG4
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RoHS
COM PLIANT
M17 1RY
6. To disconnect the battery when charged, switch off the mains supply and
unplug. Caution: Because of risk of explosive gas, only disconnect the
crocodile clips after unplugging the battery charger from the mains supply.
Check the fluid levels and top up if necessary and wipe the battery clean.
If the battery has been removed, replace in the vehicle and re-connect.
Product Specifications:
Streetwize Part Number: SWBCG4
Voltage Rating Input: 230V 50Hz
Output Rating: 12V DC - 2.8 ADC equal to 4 Amp RMS
Streetwize Part Number: SWBCG6
Voltage Rating Input: 230V 50Hz
Output Rating: 12V DC - 4.2 ADC equal to 6 Amp RMS
The WEEE symbol on this product means that this product should be
ethically dismantled or recycled to minimise environmental impact.
Please check with your local authority for more information.
IMPORTANT: ADDITIONAL SAFETY INFORMATION
This Battery Charger is NOT intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are supervised or have been given instruction
concerning use of the Battery Charger by a person responsible for their safety.
FOR INDOOR USE ONLY
12Volt 4Amp & 6Amp
Battery Charger
SWBCG6
SWBCG4
Please read these instructions carefully before operating this battery charger.
Part No. Rated Output Battery Voltage Battery Capacity
SWBCG4 4 Amp 12 Volt 12-48 Ah
SWBCG6 6 Amp 12 Volt 20-80 Ah
SWBCG4 & BCG6 Manual AW 2016_Layout 1 01/07/2016 08:59 Page 1
WARRANTY: The 12 month warranty on this product will need to be activated within
30 days of purchase, please go to our web site and click on the “Warranty” link and
enter your details on the warranty screen. www.streetwizeaccessories.com.
RoHS
COM PLIANT
M17 1RY
6. To disconnect the battery when charged, switch off the mains supply and
unplug. Caution: Because of risk of explosive gas, only disconnect the
crocodile clips after unplugging the battery charger from the mains supply.
Check the fluid levels and top up if necessary and wipe the battery clean.
If the battery has been removed, replace in the vehicle and re-connect.
Product Specifications:
Streetwize Part Number: SWBCG4
Voltage Rating Input: 230V 50Hz
Output Rating: 12V DC - 2.8 ADC equal to 4 Amp RMS
Streetwize Part Number: SWBCG6
Voltage Rating Input: 230V 50Hz
Output Rating: 12V DC - 4.2 ADC equal to 6 Amp RMS
The WEEE symbol on this product means that this product should be
ethically dismantled or recycled to minimise environmental impact.
Please check with your local authority for more information.
IMPORTANT: ADDITIONAL SAFETY INFORMATION
This Battery Charger is NOT intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they are supervised or have been given instruction
concerning use of the Battery Charger by a person responsible for their safety.
FOR INDOOR USE ONLY
12Volt 4Amp & 6Amp
Battery Charger
SWBCG6
SWBCG4
Please read these instructions carefully before operating this battery charger.
Part No. Rated Output Battery Voltage Battery Capacity
SWBCG4 4 Amp 12 Volt 12-48 Ah
SWBCG6 6 Amp 12 Volt 20-80 Ah
SWBCG4 & BCG6 Manual AW 2016_Layout 1 01/07/2016 08:59 Page 1
WARRANTY: The 12 month warranty on this product will need to be activated within
30 days of purchase, please go to our web site and click on the “Warranty” link and
enter your details on the warranty screen. www.streetwizeaccessories.com.
PLEASE NOTE: This product is a Battery
Charger ONLY, the unit will NOT hold a
charge or jumpstart any vehicle.

Other manuals for Streetwize SWBCG4

Questions and Answers:

Streetwize SWBCG4 Specifications

General IconGeneral
BrandStreetwize
ModelSWBCG4
CategoryBattery Charger
LanguageEnglish

Related product manuals