EN
INSTRUCTIONS:
- Open Lid to Fill
- Do Not Exceed Maximum Filling Level
- Recommended Maximum 25 Pumps
- Open Safety Pressure Relief Valve when 40 PSI
- Use On/Off Trigger to Control Spray
- Adjust Nozzle at End for Either Fine Mist or Direct Spray
- Always Release Pressure when Job is Finished
- Empty Bottle
SAFETY WARNING:
- Always Wear Protective Clothing, Gloves and Mask When Spraying.
- Avoid Spraying in Strong Winds.
- If Spraying in Light Wind Conditions Always Spray with the Wind Blowing the Spray Away from You.
- Always Release Pressure Before Refilling, Servicing or Storing.
- Do Not Leave Sprayer Unattended While Pressurized.
- Chemical Sprays are Dangerous, if Swallowed or Come in Contact with the Skin. Please Always Refer to the
Chemical Supplier Safety Instructions or Contact the Poisons Information Centre or a Doctor Immediately.
- Always Refer to Mixing and Safety Instructions as Specified by Chemical Supplier
- Wash Thoroughly After Use.
PARTS LIST
To Next Page
Loading...