EasyManua.ls Logo

Strend Pro QL53P-196 - Page 52

Strend Pro QL53P-196
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
- Before starting mowing, check the terrain where the lawnmower will be used and remove stones, wires,
sticks, splinters, bones and other foreign objects, which could become caught in it or deflected or cause
injuries.
- ATTENTION! Do not use the lawnmower on slopes with an inclination of more than 20°, otherwise motor
seizure might occur!
- For best results, do not mow wet grass as wet grass tends to stick to the bottom of the mower. The mown
grass is not properly removed from the mower and you can slip and fall on it.
Mowing with the grass catcher
- When the grass catcher is installed, grass clippings are discharged into the grass catcher.
- CAUTION! In case of poor collection of mower grass, please increase the mowing height and check whether
the lawn is wet.
Mowing with rear discharge
- Without the grass catcher installed, the grass catcher cover serves as a deflector that directs the movement
of the grass clippings towards the ground. A row of grass clippings is thereby formed behind the lawnmower.
Mowing with side discharge
- CAUTION Attach and remove the side discharge deflector only with the engine turned off.
- Use your hand to lift the side discharge cover and attach the side discharge deflector.
- In order to mow with side discharge, it is necessary to install a mulching plug into the rear discharge chute.
- CAUTION Attach and remove the mulching plug only with the engine turned off.
Mulching
- CAUTION Use only original mulching accessories when mulching.
- Remove the grass catcher and hold the plastic grass catcher cover with your hand.
- Install the mulching plug into the discharge chute and make sure that the plug is seated firmly.

Related product manuals