Strictly Beds & Bunks Everest - User Manual

Everest, Plato
Nepal, Goliath (All Sizes)
Assembly Instructions
IMPORTANT: of
the packaging until you are satisfied
with your purchase.. Please keep all
cardboard until fully satisfied.
DO NOT DISPOSE
Assembly Instructions
IMPORTANT – READ CAREFULLY –
RETAIN FOR FUTURE REFERENCE
Single Size Kit C
Double Size Kit G
Instructions: EV/NEP
(Version May2021)
Safety First !
(Maximum height: 20cm).
The top surface of the mattress must not be above the line ,marked on the frame
The size of the mattress required is detailed below:
Standard 3ft Single, Standard Length - Mattress size 90cm by 190cm
Small 3ft Single, Standard Length - Mattress size 75cm by 190cm
Standard 2ft 6 Single, Short Length - Mattress size 90cm by 160cm
Small 2ft 6 Single, Short Length - Mattress size 75cm by 160cm
Small 4ft Double, Standard length - Mattress size 120cm by 190cm
Standard 4ft 6 Double, Standard Length - Mattress size 137cm by 190cm
High beds and the upper bed of a bunk bed are not suitable for children under six years due to risk of injury
from falls.
Be aware of the danger of young children (under 6) falling from upper bunk.
Beds should not be used if any structural part is broken or missing.
Bunk beds and high beds can present a serious risk of injury from strangulation if not used correctly. Never
attach or hang items to any part of the bunk bed that are not designed to be used with the bed, for example,
but not limited to ropes, strings, cords, hooks, belts and bags.
Children can become trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of
furniture (eg cupboards) and the like. To avoid risk of serious injury the distance between the top safety
barrier and the adjoining structure shall not exceed 75mm or shall be more than 230mm.
Always ensure that guardrails, ladder and other components are maintained in the proper position and free
from damage, and all the screw fixings tight.
Always use the ladder for entering and leaving the upper bunk.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Use a nightlight as an added safety precaution for persons under the upper bunk.
Use guardrails on both sides of the upper bunk.
Every bedroom must have at least one opening window. Ventilation of the room is necessary in order to keep
the humidity low and to prevent mould in and around the bed.
The bed complies with BS EN 747-1: 2012+A1 :2015 safety standards

Summary

Safety First!

Mattress Size Requirements

Specifies required mattress dimensions for different bed sizes, and maximum height.

Age and Fall Risk Warnings

Warns about risks for children under six and falling from upper bunks.

General Safety Precautions

Covers structural integrity, strangulation, entrapment, and proper use of parts.

Room Safety and Ventilation

Emphasizes window ventilation and adherence to safety standards.

Fixing List and Customer Care

Fixing Identification

Lists and describes various fixings (bolts, screws, dowels, brackets, caps) with quantities.

Customer Care and Support

Information on ordering replacement parts and seeking after-sales assistance.

Assembly Top Tips

Dowel Rod Insertion Guidance

Instructions on correctly inserting dowel rods for a tight fit without misalignment.

Glue Usage for Fixings

Guidance on using glue with specific bolts to prevent them from working loose.

Hole Preparation and Finishing

Advice on clearing holes and recommendations for applying finishes to the bed.

Corner Post Orientation

How to orient corner posts, noting the white mark and L/R markings.

Parts Identification

Straight Ladder Model Parts

Identifies parts specific to the Everest/Plato Straight Ladder Model.

Slanted Ladder Model Parts

Identifies parts specific to the Nepal Slanted Ladder Model.

Identifying Parts by Marking

Red Marking Identification

Identifies parts with red marker pen, typically guard rails and top headboard facias.

White Marking Identification

Identifies parts with white chalk, usually bottom guard rails and middle headboard facias.

Blue Marking Identification

Identifies blue marked parts for single and double bunk beds, including headboard facias.

Side Rail Marking Identification

Identifies blue marked side rails and their fixing configurations.

Building the Headboards

Corner Post and Headboard Assembly

Instructions for positioning corner posts and assembling headboards with color-coded parts.

Dowel Rod Insertion for Headboards

Reiteration of dowel rod placement for ensuring a secure headboard fit.

Ladder Construction and Attachment

Attaching Side and Guard Rails

Guides attaching rear side rails and back guard rails, noting loose bolts initially.

Ladder Strut and Step Assembly

Explains attaching ladder steps to struts, emphasizing tight fit and mis-drilled holes.

Ladder Positioning and Model Specifics

Straight Ladder Positioning

Instructions for marking side rails for ladder placement in straight models.

Slanted Ladder Positioning

Instructions for marking side rails for ladder placement in slanted models.

Straight Ladder Model Assembly Steps

Attaching Ladder Hooks

Step-by-step guide to attaching ladder hooks to the ladder struts.

Fixing Ladder to Bunk

How to attach the ladder to the bunk bed using marked lines and hooks.

Attaching Front Guard Rails

Instructions for attaching the front guard rails using spacer bars and screws.

Slanted Ladder Model Assembly Steps

Attaching Front Guard Rails (Slanted)

Attaching front guard rails for the slanted ladder model using specific parts.

Ladder Hooks and Attachment (Slanted)

Attaching ladder hooks and securing the ladder to the bunk bed.

Centre Rail and Base Slat Installation

Attaching Centre Rails

Instructions for attaching centre rail brackets for single and double bunk beds.

Attaching Base Slats

Guidance on positioning and screwing base slats, including strengthening tips.

Guard Rail Supports and Added Safety

Attaching Guard Rail Supports

Securing guard rail supports to prevent guard rails from forcing apart.

Securing Bed for Stability

Instructions for using brackets to stabilize the bed against wobbling or uneven floors.

Strictly Beds & Bunks Everest Specifications

General

Brand	Strictly Beds & Bunks
Model	Everest
Category	Indoor Furnishing
Language	English