Need help?Do you have a question about the STRIPMEISTER Electric E250 and is the answer not in the manual?
Inspect cutting knife, feeder wheel assembly, and machine for damage, dirt, debris, or loose parts.
Lubricate knife carriage slot and height adjustment rod every 100 hours using recommended grease.
Check gear box oil level every 400 hours; ensure oil is visible after tilting the machine.
Details Wire Strip Meister Inc.'s limited liability for damages, excluding indirect, consequential, or punitive losses.
General| Model | E250 |
|---|---|
| Power Consumption | 250W |
| Material | Steel |
| Wire Capacity | Up to 25 mm |
| Stripping Length | Adjustable |
| Category | Electric Wire Stripping Machine |
| Power | 250W |
| Wire Size Capacity | 0.5-25mm² |
| Stripping Capacity | 0.5-25mm² |
To Next Page
