5 BA_560_A4_180619_en
2
2.1
General
Any person involved in the installation, operation, maintenance and repair of
the machine must have read and understood the operating instructions and
mainly the safety instructions before starting the machine.
Operating instructions
2.2
The operating side of the machine is the basis for descriptions referring to
sides. The class identification (type) as well as serial and model number (after
the dash) are located on the right hand side of the housing.
Class identification, serial number and orientation of the
machine
2.3
Class 560-11, -21
Range of application and intended use
Automatic single thread blindstitch spot tacking machine for attaching woven
labels, as well as for attaching linings, hems, trouser turn-ups and seams.
All machines are equipped with fully automatic control of the sewing process,
preselection of 1 to 20 (max. 255) spot tacking stitches, thread trimmer and
pneumatic lifting.
To Next Page
Loading...
Need help?
General
