Stromberg Carlson Products CL-36

To Next Page

phone: 231-947-8600

www.strombergcarlson.com

INS-CL36

12.14.16 For installation video and parts breakdown, see www.strombergcarlson.com or call 231-947-8600 x108

Extend-A-Line

MODEL # CL-36, CL-27 & CL-12

Thank you for purchasing the Extend-A-Line by Stromberg Carlson Products, Inc.

Please read all directions prior to installation. The Extend-A-Line clothes line is designed to support 10 lbs per arm, 60 lbs maximum load

when evenly spaced. Clothes line must be removed prior to travel, or if you are climbing up/down your ladder, as the housing will not

withstand the pressure of being climbed on. Fold arms into the storage position (shown below) and secure with hook and loop straps

prior to installation/removal and when not in use. The Extend-A-Line is designed to be mounted to 1” or 1 ½” exterior ladders with 9 5/8”

- 10 1/8” spacing between upright tubing (variable based on ladder tubing diameter). Prior to installation of your clothes line, inspect arm

bases to ensure they are securely contained in the receiving holes of the housing. Please take into consideration inclement weather

conditions and remove/store to increase the life of your product. Make sure to fasten items appropriately to clothes line to prevent loss

of clothing.

Carton Contents: (1) plastic clothes line housing assembly with (6) chrome arms and (1) aluminum mounting bracket (designed for

alternate mounting method). Fully exploded parts diagram shown on reverse side. Large bag with twist fastener provided for storage

when not in use/not mounted to your unit.

Ladder mounting method:

 Ensure there is ample clearance behind your unit’s ladder to allow the arms to swivel 180° without interference.

 Identify a comfortable working height, where you can hang items without them touching the ground.

 Make sure the adjustment knob is loosened and the clamshell grip is fully open.

 With your clothes line in the storage position (shown below), place the non-clamshell side of the housing around your ladder

tubing and rotate it flush against both ladder tubes. Bottom of housing should be resting on a ladder tread.

 Tighten adjustment knob until clamshell is tight around the ladder tubing (shown to the right).

 See picture below for example of properly installed Extend-A-Line.

 Unfasten your clothes line arms and spread to appropriate positions.

Aluminum bracket mounting method:

 Remove aluminum mounting bracket from the sleeve on the back of the Extend-A-Line housing.

 Identify your mounting surface, being sure to locate structural backing to screw into. Wood or square tube framing is

recommended.

 If there is no structural backing, it is recommended you through bolt with appropriate bolts, washers and nuts (not provided).

Do not mount with wall anchors, refer to your camper’s manufacturer if you question your backing.

 Align your mounting bracket horizontally on your mounting surface. If the holes pre-drilled in your mounting plate (designed for

use with the bumper mount kit) do not line up with your structural backing, you will need to drill additional holes in your

mounting plate.

 Mark center lines of holes you have identified as appropriate for mounting, then set your bracket aside.

 Drill pilot holes in your mounting surface, into the structural backing.

 Apply a small amount of caulk to the pilot holes to prevent moisture from seeping into your unit/wall.

 Before the caulk dries, align your bracket with the appropriate mounting holes and attach the bracket to your mounting surface

with appropriate fasteners (determined based on actual mounting location).

 With your clothes line in the storage position, slide it onto the aluminum mounting bracket.

 Once your clothes line is securely in place, unfasten your clothes line arms and spread to appropriate positions.

* Additional mounting brackets may be purchased by calling Stromberg Carlson Products directly. Reference part #5806-CL.

** Alternate mounting locations: laundry areas, pool/hot tub areas, basements, garages, etc.

Storage Position Clamshell

Mount

Properly Installed Housing

Clamshell Mount

Need help?

Do you have a question about the Stromberg Carlson Products CL-36 and is the answer not in the manual?

Summary

Aluminum Bracket Mounting Method

The Stromberg Carlson Extend-A-Line is a versatile clothesline system designed for various mounting applications, including RV ladders, bumpers, hitches, and even indoor locations. It is available in models CL-36, CL-27, and CL-12, with additional bumper mount and hitch mount kits (CL-01 and CL-02) providing expanded installation options.

Function Description:

The primary function of the Extend-A-Line is to provide a collapsible and extendable clothesline for drying laundry. It is designed to offer a convenient drying solution for RV owners, campers, and individuals seeking a space-saving clothesline for various indoor and outdoor settings. The system allows users to spread out multiple arms to hang clothing, and then fold them back into a compact storage position when not in use.

Important Technical Specifications:

Load Capacity: The Extend-A-Line is designed to support 10 lbs per arm, with a maximum total load of 60 lbs when items are evenly spaced.
Ladder Mounting Compatibility: It is designed to be mounted to 1" or 1½" exterior ladders with a 9 5/8" - 10 1/8" spacing between upright tubing. This spacing is variable based on the ladder tubing diameter.
Arm Swivel: The arms are designed to swivel 180° for optimal positioning and drying.
Bumper Mount Compatibility (CL-01): The bumper mount kit is designed to attach to 4" square bumpers and 6" x 2" A-frames. It carries the full load capacity of the CL-36/CL-27/CL-12 (60 lbs evenly spaced).
Hitch Mount Compatibility (CL-02): The hitch mount kit is designed to insert into a 2" hitch, providing another alternate mounting location while maintaining the full load capacity.
Materials: The system includes a plastic clothesline housing assembly, chrome arms, and an aluminum mounting bracket for alternate mounting methods. The bumper mount kit includes a bumper mount tube (5850-CL), back plate (7605-117), and various bolts, washers, and nuts. The hitch mount kit includes receiver tube angle brackets (5851-CL) and a receiver tube (5853-CL).

Usage Features:

Collapsible Design: The arms fold into a compact storage position, secured by hook and loop straps, making it ideal for travel and space-saving.
Multiple Mounting Methods:
- Ladder Mounting: The housing clamps directly onto RV ladder tubing using an adjustment knob and clamshell grip. It should rest on a ladder tread for stability.
- Aluminum Bracket Mounting: The aluminum mounting bracket can be removed from the housing and screwed into a structural backing (wood or square tube framing recommended) on a mounting surface. Through-bolting is recommended if no structural backing is available.
- Bumper Mounting (CL-01): This kit allows the Extend-A-Line to be mounted to RV bumpers or A-frames. It involves attaching the aluminum mounting bracket to the bumper mount tube, which then secures to the bumper/A-frame using bolts, washers, and lock nuts.
- Hitch Mounting (CL-02): This kit enables mounting to a 2" hitch. It involves assembling receiver tube angle brackets onto a receiver tube, then attaching the bumper mount tube to this assembly, which then inserts into the hitch.
Easy Deployment: Once mounted, the clothesline arms can be unfastened and spread to appropriate positions for use.
Versatile Placement: Beyond RVs, the system can be used in laundry areas, pool/hot tub areas, basements, and garages, offering flexible drying solutions.
Carton Contents: Each unit includes the housing assembly, chrome arms, an aluminum mounting bracket, and a large bag with a twist fastener for storage. The bumper and hitch mount kits include specific components for their respective installations.

Maintenance Features:

Pre-Installation Inspection: Users are advised to inspect arm bases to ensure they are securely contained in the housing's receiving holes before installation.
Weather Considerations: It is recommended to remove and store the Extend-A-Line during inclement weather conditions to increase its lifespan.
Travel Precaution: The clothesline must be removed prior to travel to prevent damage.
Ladder Safety: The housing is not designed to withstand the pressure of being climbed on; users should remove the clothesline if climbing up or down the ladder.
Secure Fastening: Items should be fastened appropriately to the clothesline to prevent loss of clothing, especially in windy conditions.
Pilot Holes and Caulk (Aluminum Bracket Mounting): When using the aluminum bracket, drilling pilot holes and applying a small amount of caulk to these holes is recommended to prevent moisture from seeping into the unit/wall.
Replacement Parts: Additional mounting brackets can be purchased directly from Stromberg Carlson Products.
Installation Video and Parts Breakdown: Users can access an installation video and parts breakdown online at www.strombergcarlson.com or by calling their customer service line for assistance.