Stromer ST1 User's Manual Supplement

ENGLISH
LEGAL INFORMATION
myStromer AG
Freiburgstrasse 798
CH-3173 Oberwangen
Europe:
info@stromerbike.com
Telephone: +41 31 848 23 00
USA:
service@stromerbike.com
Telephone: (800)819-4262
In charge of distributing and marketing the ope-
rating instructions: inMotion mar.com
Rosensteinstr. 22, D-70191 Stuttgart
info@inmotionmar.com,
www.inmotionmar.com
Text: Veidt Anleitungen
Friedrich-Ebert-Strasse 32, D-65239 Hochheim
Anleitungen@thomas-veidt.de
Illustrations: © myStromer AG
© Before reproducing, reprinting, translating or
using this document for any commercial purpose
(even in part, printed or electronic form), you
must first receive written consent.
ST2 Beltdrive EN Version 1.0 September 2020
Gears are components that are vital to your
safety. Read the manufacturer’s operating instruc-
tions and familiarise yourself with the operation of
your S-Pedelec’s gears before riding. Leave sys-
tem repairs to your Stromer dealer! Work that is
not carried out properly may reduce the safety of
your S-Pedelec!
If your gears ever fail to shift cleanly, avoid riding
any further if possible. Take your Stromer back to
the dealer for a check-up.
Tyres
Your ST2 has newly developed tyres with incre-
ased puncture protection. We recommend a tyre
pressure of 2.2bar / 32psi.
Check the tyres of your S-Pedelec regularly.
The lowest and highest authorised pressures can
be found on the side of the tyre. Please adhere to
them, otherwise the tyre may detach from the rim
of the wheel or burst. If differing pressures are
specified for the rim and the tyres, the lower ma-
ximum pressure and the higher minimum pressu-
re are to be taken into account.
Please read the information in the "Rims/Tyres"
section of the general operating instructions
"User Manual ST1|ST3|ST5".
Connectivity
Connected on the go: All Stromer bikes are equip-
ped with the OMNI connect cloud-based plat-
form. You can use OMNI connect directly via your
Stromer's touchscreen or via the OMNI app on
your smartphone.
https://www.stromerbike.com/en/
swiss-technology#Connectivity
Your Stromer ST2 uses OMNI C.
Different tightening torques
During assembly and maintenance work, the fol-
lowing torque values are applied:
Rear axle torque 28 Nm
Belt tensioner mounting on frame 6 Nm
Anchor cable 3-4 Nm
Frame lock on the dropout 4.5 Nm
Grip shift handlebar clamp 1.5-2.5 Nm

Stromer ST1 Specifications

General

Bluetooth	Yes
Motor power	670 W
Brake system	-
Luggage rack	Rear
Torque (max)	35 N⋅m
Product color	Blue
Autonomy (max)	180 km
Number of speeds	9
Wheel size (imperial)	27.5 \
Luggage rack maximum load	22.5 kg
Maximum speed (e-bike mode)	45 km/h
Charging time	3.4 h
Battery voltage	48 V
Battery capacity	500 Wh
Distance per battery charge (pedal assist mode)	90 km
Frame material	Aluminum

Weight and Dimensions

Weight (including battery)	- g