Do you have a question about the Strong Pools and Spas The Cyprus and is the answer not in the manual?
Pumps | 2 |
---|---|
Heater | 4kW |
Shell Material | Acrylic |
Lighting | LED |
Warranty | 5 years |
Guidance on selecting an appropriate and safe location for spa installation, considering various factors.
Specific advice for installing a spa in an indoor environment, addressing humidity and drainage requirements.
Explanation of the Jets 1 function to activate the pump and its automatic shut-off.
Details on the auxiliary key for secondary pump/blower and changing settings.
Functionality of the light control, including LED multi-color operation and cycling.
How to adjust temperature using the Heat key, including setting minimum and maximum points.
Explains how the control panel operates upon startup, including software release and temperature displays.
Instructions on priming the pump, ensuring valves are open, and turning on the circuit breaker.
Importance of proper filtration for water clarity and how the system removes debris.
Specific conditions for heat mode operation in 120V versions, including pump and blower settings.
Steps to diagnose and resolve issues when the topside control panel shows no display.
Troubleshooting guide for 'th1/38' error code related to temperature sensing probe connection.
Troubleshooting guide for 'th2/current temperature' error code for temperature sensing probe.
Diagnosing 'th2/39' error, indicating low temperature or disconnected sensors, and freeze protection.
Explanation of the 'OH' (OVERHEAT) error and automatic system shutdown procedure.
Addresses 'hot' error indicating high heater body temperature and system restart conditions.
Explains 'HL' error for high temperature limits and manual restart requirements.
Troubleshooting 'FLO' error indicating flow problems, filter issues, or valve obstructions.
Diagnosing 'FLC' error related to a stuck pressure switch requiring replacement.
Steps to fix erratic behavior on the topside control panel, checking connections and components.
Solutions for issues where pumps, blower, or light fail to turn off, suggesting control replacement.
Guidance on troubleshooting a non-functional circulation pump, checking fuses and connections.
Steps to resolve issues with the spa's LED multi-color light not turning on or functioning correctly.
How to use the Freeze Protect Over-ride (FPO) function during cold fills to prevent freezing.
Explains the necessity of the filtration cycle for impurity removal and contaminant prevention.
Emphasizes maintaining proper water chemical balance (pH, alkalinity, sanitizer) for safety and equipment longevity.
Provides guidance on specific chemicals for spa maintenance and their correct application.
Recommended chlorine levels, testing frequency, and application methods for spa water.
Use of chemicals to clear cloudy water and prevent calcium deposits on spa surfaces.
Chemical for preventing iron staining in spa water, used during filling.
Chemical used to disperse foam and compatible with other spa treatment chemicals.
Guidelines for periodically changing spa water based on usage and conditions.
Recommendations for cleaning the filter cartridge regularly and soaking it in filter cleaner.
Proper procedure for adding chemicals, including pump operation and water temperature.
Identification and operation of the 3-inch directional jet with center pivots.
Identification and operation of the 2-inch directional jet with center pivots.
Information on the air control valve, advising to turn it off for faster heating.
Identification of the bottom suction component of the spa.
Details the warranty coverage for the spa shell made from authentic granite resin.
Outlines the one-year warranty for control equipment, pumps, heaters, and plumbing.
Specifies the one-year warranty for the Ozone Generator System, extending to the original purchaser.
Important notes regarding warranty start dates, validity, and common exclusions like neglect or misuse.
Lists essential safety rules and warnings for spa users to prevent injuries.