Strongarm Walking Foot Sewing machine User Manual

WALKING FOOT
SEWING MACHINE
USER MANUAL

Strongarm Walking Foot Sewing machine Specifications

General

Brand	Strongarm
Model	Walking Foot Sewing machine
Category	Sewing Machine
Language	English

Summary

Unpacking and Setting Up Your Strongarm Sewing Machine

Inserting Needles

Threading up the machine

Winding, threading and inserting the bobbin

To wind a bobbin

Threading the Bobbin Case

To install the bobbin case

To pick up the bobbin thread

Adjusting The Stitch

Setting The Tension

Adjusting Walking Foot Pressure

Choosing the Right Needles

Matching Fabric To Needles And Thread

How To Mount The Powerwheel

Troubleshooting

What do I check when the thread breaks?

Steps to diagnose and resolve thread breakage issues.

What do I check when the needles are breaking?

Guidance on troubleshooting needle breakage problems.

Why are there are loops on the underside of the fabric?

What do I check for skipped stitches?

Troubleshooting steps for skipped stitches.

Why does the thread pull out of the needle when I start to sew?

Oiling and Care

Cleaning a Thread Jam

Procedure for disassembling and cleaning the bobbin system after a thread jam.

Checking and Repairing the Retaining Ring Cap Spring

Measurement and Adjustment of Machine timing

Re-setting the Needle Bar Height

Left-Right Timing Measurement and Adjustment

Rotational Timing Measurement and Adjustment

If the Balance wheel spins but the machine will not sew