8
MAINTAINING YOUR ERGO-PRO
TM
CHAIR
We at Stronglite have designed and built the ERGO-PRO
TM
chair to be long lasting and trouble free.
All the exposed nuts are locking to help prevent loosening. All of the pivot joints are close tolerance to
eliminate movement and reduce wear. Even so, it is possible for fasteners to become loose, parts to
wear and damage to occur. It is up to you to maintain your chair in good condition. Tighten any
loose fasteners and replace or repair any worn, damaged or missing parts. If you need replacement
parts, contact Stronglite at 1-800-289-5487. See our warranty page,
www.stronglite.com/home/sl1/warranty_info.html, for more information on repairs and replacement parts.
WARNING: A CHAIR WITH LOOSE, DAMAGED OR MISSING PARTS CAN FAIL POSSIBLY
CAUSING PERSONAL INJURY. INSPECT YOUR CHAIR BEFORE EACH USE AND KEEP IT IN
GOOD CONDITION.
INSPECTION:
Before each use: Inspect your chair to see that all joints are as tight as possible without causing
binding when the chair is folded up. Check to see that there are no damaged or missing parts. If you
have any questions or need assistance please call 1-800-289-5487.
CLEANING:
The vinyl on your chair can be cleaned with mild soap and water and using a non-abrasive cloth. The
powder coated aluminum and finished wood components can also be cleaned in this manner.
WARNING: PROLONGED EXPOSURE TO TEMPERATURE EXTREMES WILL CAUSE DAMAGE
TO VINYL.
To Previous Page
Loading...