What to do if the Strongway 500A 53013 alarm sounds and the reverse polarity indicator is on?
The alarm sounds and the reverse polarity indicator is on because the jump start cables are connected incorrectly. To resolve this, connect the jump start cables the correct way.
Why is there no charging indication on the LCD screen when recharging my Strongway Remote Starter?
If your Strongway Remote Starter isn't charging, first ensure that the AC wall outlet has power. If the outlet works, the AC charger might be faulty and require replacement.
What to do if my Strongway 500A 53013 Remote Starter does not boost the vehicle?
If your Strongway Remote Starter does not boost the vehicle, consider these possibilities: 1. The jumpstarter battery may not be fully charged; in this case, fully charge the jumpstarter. 2. The engine start capacity may exceed the jumpstarter’s boosting capacity; use a higher capacity jumpstarter. 3. The jumpstarter's battery may be damaged; replace the jumpstarter’s battery. 4. The vehicle's battery may be damaged; replace the vehicle battery.
Why can't my Strongway 500A 53013 Remote Starter be fully charged after 72 hours?
If the Strongway Remote Starter cannot be fully charged after 72 hours, it could be due to: 1. A low output AC charger, in which case you should replace the 115V AC charger. 2. A permanently damaged internal battery; have the battery checked at a car maintenance workshop. 3. Switches being in the “ON” position or DC loads being connected; place all switches in the OFF position and disconnect all DC loads.
Understand all instructions to prevent injury or property damage.
Warning regarding chemicals causing cancer or reproductive harm.
Maintain a clean, dry, well-lit area, avoid fire risks, and keep bystanders away.
Avoid explosive gases, wear protective gear, and maintain balance.
Follow grounding rules, avoid wet conditions, and protect power cords.
Use as designed, check for damage, and disconnect power before adjustments.
Do not charge dry-cell batteries; ensure proper polarity for jumpstarting.
Check vehicle manual for compatibility with jumpstarting.
Wear safety goggles, avoid sparks, remove metal items, disconnect cables correctly.
Do not use in closed areas, for 6V/24V systems, or as a battery replacement.
Procedures for skin and eye contact with battery acid.
Identifies and describes the various parts of the jumpstarter unit.
Instructions for checks to be performed before each use.
Warnings about explosive gases and flammable materials during operation.
Steps to power DC appliances using the jumpstarter's DC sockets.
Steps to charge or power USB devices using the jumpstarter.
Instructions for using the built-in LED light functions.
Detailed steps for jumpstarting a vehicle engine.
Procedure for connecting the AC charger to recharge the unit.
Guidelines for cleaning, checking switches, and covering outlets.
Recommendation to recharge the battery every 90 days for optimal performance.
Exclusions from warranty coverage, including wear and tear, misuse, and alterations.
Requirements for making a warranty claim, including receipt and product.
Defines sole remedy and liability limits for damages.
User acknowledges risk for uses outside specified instructions.
Specifies legal rights and jurisdiction for warranty disputes.
General| Brand | Strongway |
|---|---|
| Model | 500A 53013 |
| Category | Remote Starter |
| Language | English |
To Next Page