Sketch map of the product
1. When using it for the first time, please take the headphone out of the charging box and tear off
the protective film. When putting the earphoneback in the charging compartment, the earphone
will start charging and shut down automatically. When the headset is taken out of the charging
compartment, the headset will automatically turn on.
2. If press and hold the multifunction for 2 seconds, the headset will turn on.
i press and hold the multifunction key for 3 seconds, it will turn off.
@ Volume-/Next song
Step 1: Adjust the headset to
Pair with smartphones /tablets
MFB ( Multi-function button)
1. Press mfb (multi-function button) continuously for 2 seconds to turn on, then tumn on
until the blue light can be seen.
2. The headset flashes red and blue alternately (pairing mode)
3. Turn on the settings of the phone/tablet - Bluetooth - turn on Bluetooth
-Power HBQ Pro - pairing / connection- play music.
The way to pair with computer/Laptop
Tu r n o n t h e co m p u t e r s e t t i n gs - d evi c e s - Bl u e to o t h an d o t he r d ev i c e s - -t u m o n B l u e t o o t h - a d d
Bluetooth or other devices- search for Bluetooth devices-Power HBQ Pro-pairing/connection
Note: If the computer does not have Bluetooth, please insert the Bluetooth adapter. Download
the Bluetooth driver and then use it normally.
Open alexa app-settings-add new devices-Bluetooth-new pairing--search devices-Power
HBQ Pro-pairing / connection--play music.
To Next Page
General